PCE Instruments PCE-USC 20, Operating Manual, Page: 27 / 66

24
NO Submenus Details
1-2
REMARKS
(See the last page)
 Input letters or numbers as remarks
information.
 Press corresponding submenu selection
key to switch circularly between the
characters; press [+] key to increase or [
-
]
key to decrease the value.

Note: the remarks can only be input
before saving the data, and it can’t
be changed after the data being
saved.
1-3
CHN RECALL
√
 Recall parameters setting or data stored in
the channel.
 Press corresponding submenu key to
select, press [+] key to recall.
1-4 SAVE/DELETE
 SAVE: save the current settings or data
into the selected channel.
 DELETE: delete the settings or data in the
selected channel.
 It displays "DELETE" when there has
stored settings, otherwise displays
"SAVE".
 Press corresponding submenu key to
select "SAVE" or "DELETE"; press [+] key
to carry out.
2-1 DATA ID

The DATA ID contains 1-30 ID
，
test data will
be stored in the selected channel.

Press corresponding submenu selection
key to switch between “CHANNEL ID" and
"DATA ID"; press [+] key to increase or [
-
]
key to decrease the number.
2-2 REMARKS
 Input letters or numbers as remarks
information.
 Press corresponding submenu selection
key to switch circularly between the
characters; press [+] key to increase or [
-
]
key to decrease the value.

Note: the remarks can only be input
before saving the data, and it can’t
be changed after the data being
saved.
2-3
DATA RECALL
√
 Replay the data stored in the selected
channel.
 Press corresponding submenu key to
select; press [+] key to replay.
2-4 SAVE/DELETE  Refer to 1-4 above.