13
up the instrument, and continuously press [
↔
] key in the self-checking process,
then the instrument’s parameters will be returned to the default settings of
factory release (but it will not change the stored data which has been saved in
the STORE menu).
(3)
Return to the state of factory release
: under power off, press [PgUp] and
[PgDn] keys at the same time and keep still. Meantime press [Power] key, then
the instrument’s parameters and the stored data will be returned to the default
settings of factory release. At this time, it will delete all the parameters and
data stored after factory release. So you should pay more attention to it.
Note: after start up instrument it will make automatically Self-checking then
enter regular working condition, if Self-checking shows irregular, turn
off instrument then start up again, if it still can not pass the
Self-checking ( means software halted ), return to state of factory
release and update the system to reach regular working condition.
4.7 Important Basic Setting
4.7.1 Working Mode Setting
Set working mode of the instrument: single element or double elements.
Operating:
press [PgUp] or [PgDn] or [
] key for PULS main menu, press [
◄
]
key to select DUAL submenu
，
press [+] or [
-
] key to set DUAL “on” or
“off”. “on” means double mode and “off” means single mode.
4.7.2 Language Setting
Languages for man-machine conversation: Chinese/English.
Operating:
press [PgUp] or [PgDn] or [
] key for CONFIG 1 main menu, press
[
◄
] key to select language submenu, press [+] or [
-
] key to set
language.
4.7.3 Unit Setting
Set unit for instrument’s displayed parameter: “mm” or “inch”
Operating:
press [PgUp] or [PgDn] or [
] key for CONFIG 1 main menu, press
[
◄
] key to select UNIT submenu, press [+] or [
-
] key to set unit for the
parameters.
