PCE Instruments PCE-USC 20 Operating Manual Download

Page: 64 / 66

Appendix

Ⅰ

User Guidelines

(1) After users purchase our products, please fill out the "Warranty Registration

Card" and affix the official seal. Please mail the First union and purchase

invoice copy to our Customer Service Department, or commend the instrument

sold unit to mail. Please send the Second union to the local subsidiary

company maintenance station to go through registration formalities. If you are

in the area out of our maintenance stations, please mail the First union and the

Second union together to our Customer Service Department. For incomplete

paperwork, provide non-warranty maintenance only.

(2) From the date users purchase our products, if it appears quality fault (except

for non-warranty accessories) within the first year, please depend on

“maintenance card” (user reserve union) or purchase invoice copy to contact

subsidiary company maintenance station in each area for maintenance, within

the warranty period, can’t bring forth maintenance card or purchase invoice

copy, We will calculate the warranty period in accordance with factory warranty

for a period of one year.

(3) Beyond warranty period, failure of our product, service stations around

responsible after-sale service provide repair and maintenance service and

fees charged according our maintenance regulations.

(4) Except finalized products, “special configuration” (peculiar type probe, special

software, etc) charges cost according to company regulations.

(5) User-disassembly of our products, due to transportation, improper storage or

incorrect operating contrary to “product manual” resulting in product damage,

as well as secretly altered the warranty card, without purchases certificate,

under these conditions warranty un-supported by our company.

Summary of Contents for PCE-USC 20



































































Search results

Summary of Contents for PCE-USC 20

Reviews:

Related manuals for PCE-USC 20

Brands by name

Popular brands

PCE Instruments PCE-USC 20, Operating Manual

Search results

Summary of Contents for PCE-USC 20

Reviews:

Related manuals for PCE-USC 20

Brands by name

Popular brands