![background image](http://html1.mh-extra.com/html/patton-electronics/smartware-r-3-20/smartware-r-3-20_software-configuration-manual_4044387530.webp)
PSTN profile configuration task list
530
SmartWare Software Configuration Guide
41 • PSTN profile configuration
Procedure:
Create a PSTN Profile and enter the PSTN profile configuration mode
Mode: Configure
Configuring the echo canceller
Echoes are reflections of the transmitted signal that result from impedance mismatches in the hybrid (bi-direc-
tional 2-wire to 4-wire conversion) device, causing an echo on the wire. Echo cancellation provides near-end
echo compensation for this effect as shown in
figure 86
.
Figure 86. Echo Cancellation
Procedure: Disable echo cancellation.
Mode: Profile PSTN
Configuring output gain
The output gain determines the voice output volume gain towards PSTN ports as shown in
figure 87
.
Figure 87. Applying output gain
Procedure: Configure voice output gain.
Step
Command
Purpose
1
node(cfg)#profile pstn
name Create a PSTN profile with name name and enter PSTN profile
configuration mode. The newly created profile contains default
values for all parameters.
If a profile with name
name already exists, only the PSTN profile
configuration mode is entered.
2
node(pf-pstn)[
name
]#...
Configuration steps as described in the chapters below
Step
Command
Purpose
1
node(pf-pstn)[
name
]#no echo-canceller
Disable echo canceller (Default: Enabled)
Echo
Echo canceller
Node
Node
Context CS
“switch”
PSTN interface
Outgoing voice is amplified by
“output gain”
voice volume: 10 dB
PSTN
Profile
B