Configuring multiple SIP services on a SIP gateway
505
SmartWare Software Configuration Guide
39 • SIP gateway configuration
4
[
name
] (gw-svc)[
<svc-name>
]#
•
authentication
•
call-transfer-version
•
contact-address
•
default-server
•
domain
•
nat-traversal
•
new-session-after-redirect
•
registrar
•
registration-lifetime
•
session-timer
•
session-timer-version
•
use
Configure all necessary parameters for
your service using the service com-
mands shown in the previous column.
A detailed description of these com-
mands can be found in the Software
Configuration Guide.
5
Repeat steps 3 & 4 for each additional service you want to use.
6
[
name
] (gw-svc)[
<svc-name>
]# context cs
Change to the context cs mode.
7
[
name
] (ctx-cs)[switch]# interface sip
<if-name>
Create a SIP interface for your service
8
[
name
] (if-sip)[
<if-name>
]# bind gateway
<gw-
name>
Bind the interface to your SIP gateway
9
[
name
] (if-sip)[
<if-name>
]# service
<service-name>
Define the service within your gate-
way to use for this interface
10
[
name
] (if-sip)[
<if-name>
]#
•
address-translation
•
early-connect
•
early-disconnect
•
phone-context
•
remote
•
remote-party-id
•
route
•
use
If required, configure additional
parameters for your interface using the
interface commands shown in the pre-
vious column. A detailed description
of these commands can be found in
the Software Configuration Guide.
11
Repeat steps 7 to 10 for each additional service, you want to use.
Step
Command
Purpose
