SIP interface configuration task list
377
SmartWare Software Configuration Guide
32 • SIP interface configuration
Mode:
interface sip
Enabling support for SIP remote-party-id headers
Support for the remote-party-id header in SIP can be enabled/disabled separately for the calling and called par-
ties. Once support for remote-party-id headers is enabled in the interface sip mode, the mapping between the
remote-party-id headers and call-control properties is done in the same way as for any other SIP header using
the
address-translation
command in the interface sip mode. The following procedure shows how to enable/
disable support for the remote-party-id header.
Mode:
interface sip <if-name>
Enabling SIP RFC Privacy, Asserted-Identity, & Preferred-Identity headers
(RFC 3323/3325)
The following command sequence enables support for the SIP Privacy and Asserted-Identity headers, sending
and receiving of the Privacy as well as the Asserted-Identity headers of RFCs 3323 & 3325. This allows to pro-
vide the asserted identity to SIP entities, which require it. The privacy header suppresses the forwarding of the
identity to the final endstation. Handling of the Asserted-Identity header can be configured in the same way as
for any other SIP header using the address-translation command in the SIP interface configuration mode. The
privacy header is mapped to the call-control’s presentation indicator property field.
Step
Command
Purpose
1
node(if-sip)[if-name]# address-transla-
tion outgoing-call request-uri target-
param call redir
Enables Redirecting Party Number Tunneling
ISDN ‡ SIP: Enables transmission of the target
and cause parameters in the Request-URI for
outgoing SIP calls. Whenever the (incoming
ISDN) call has a redirecting party number
information element, the Request-URI is
extended by the target and cause parame-
ters.
Default: disabled
2
node(if-sip)[if-name]# address-transla-
tion incoming-call calling-redir request-
uri-target-param
Enables Redirecting Party Number Tunneling
SIP ‡ ISDN: Enables reception of the target
and cause parameters in the Request-URI for
incoming SIP calls. Sets the redirecting party
number information element for (outgoing
ISDN) calls where the target parameter is
present in the Request-URI.
Default: disabled
Step
Command
Purpose
1
[
name
] (if-sip)[
if-name
]# [no] remote-party-
id called-party
Enables/disables support for the called-party
remote-party-id.
2
[
name
] (if-sip)[
if-name
]# [no] remote-party-
id calling-party
Enables/disables support for the calling-party
remote-party-id.
