FXS supplementary services description
343
SmartWare Software Configuration Guide
29 • FXS interface configuration
Note
This feature is not used when the connected analog equipment is a fax,
answering machine or similar device.
Procedure:
To reject a waiting call, when a waiting call is announced with a special tone signal, the user
can either:
•
Press flash-hook, followed by the 0 key
•
Ignore the call waiting signal
The waiting call will be rejected.
Procedure:
To accept a waiting call, when a waiting call is announced with a special tone signal, the user can:
•
Press flash-hook, followed by the
2
key to put the current call on hold and accept the waiting call. Call
hold service must be enabled for this to work.
•
Press flash-hook, followed by the 1 key to terminate the current call and accept the waiting call
•
Go on-hook to terminate the current call. The terminal will ring to indicate that a call is waiting—when
this call is accepted by going off-hook again, the waiting call is connected.
Making a second call while holding first call
To make a second call while the current call is active, you will put the current call on hold, then make your sec-
ond call.
Procedure:
To make a second call to another party while keeping the current call, press
flash-hook
which puts
your current call on-hold and provides you a dialtone for the second call. After hearing the dialtone, you may
dial your second call.
To toggle between the active call and the call on-hold, press
flash-hook
, then press the
2
key on the
telephone set
Note
Call holding service must be enabled for this procedure to work.
Table 10. Command Summary
Action
Result
Press
flash-hook
, then press
0
The waiting call is rejected.
Press
flash-hook
, then press
1
This drops the current call and accepts the incoming waiting call.
Press
flash-hook
, then press
2
If you have another call on-hold, this action toggles from the current call
to the on-hold call.
Press
flash-hook
, then press
2
If you hear the
waiting tone (to indicate a new incoming call), this action
toggles to the waiting call and puts the current call to be on-hold.
Press
flash-hook
and wait for
dialtone
If you want to make a second outgoing call, this action puts the current
call on-hold and provides you dial-tone for making another call. Once
the call is made, you can toggle between the calls by using the
flash-
hook
,
2
action.
