Auto provisioning of firmware and configuration
66
SmartWare Software Configuration Guide
5 • System image handling
Note the placeholder used in the file location. Placeholders can be used for each part of the location, be it
server address, path or filename. The following place holders are available:
•
$(system.mac)
—MAC address of ETH 0/0 (without “:” between the hexadecimal characters)
•
$(system.serial)
—serial number of the unit
•
$(dhcp.66
)—DHCP option 66 (TFTP server IP), as delivered by the DHCP server (only if DHCP
is enabled)
•
$(dhcp.67)
—DHCP option 67 (Boot file name), as delivered by the DHCP server (only if DHCP
is enabled)
To use and debug provisioning
:
To continuously poll for firmware or configuration changes, use the
provisioning execute
command together
with the new
timer
command as described below. Here’s how to do both firmware and configuration provi-
sioning, with a polling interval of 10 minutes.
Step
Command
Purpose
1
[
name
] (cfg)provisioning execute FIRMWARE
Executes the provisioning profile
FIRMWARE once
2
[
name
] (cfg)debug provisioning
Enables debug output for all
provisioning operations
