Call router configuration task list
441
SmartWare Software Configuration Guide
33 • Call router configuration
16:55:33 CR > 02: Prefix Timeout Expression: E164-Number of 123 completely
(no timeout) matches 1[0-4]
16:55:33 CR > 03: Prefix Timeout Expression: E164-Number of 123 does not
match 11
16:55:33 CR > 04: Prefix Timeout Expression: E164-Number of 123 does not
match 111
16:55:33 CR > Selecting entry 2
16:55:33 CR > Execute all elements in table IF2
16:55:33 CR > Execute all elements in table route-found-place-call
16:55:33 CR > Lookup result: Route found; place call (timeout=0)
Example:
Enterprise network with local breakout and IP carrier access
Consider the following Enterprise Network.
Figure 68. Call routing example network
Note
The SmartNodes in this Network may be owned and operated by the Com-
pany or by a Service Provider.
The goal of this scenario is to connect the two PBX of sites A and B. The two sites are connected to a broad-
band IP provider. The IP network is used to exchange data and voice calls between the two sites. On the IP
network there is also a PSTN gateway (Node C) to an alternative voice carrier Melon that shall be used for most
call destinations.
Sites A and B also have connections to the local ISDN network. This is called the local breakout connection.
The local breakout is to be used as a fallback for ISDN data connections.
We assume the following:
Node A
IP
WAN
Site A
Node B
PBX
ISDN
Site B
TA
PBX
LAN
LAN
Carrier
Apple
Carrier
Orange
Carrier
Melon
Node C