3028 Turbo Statistical Multiplexer
154001UA
G-2
Table G-1 shows the action that takes place when flow control translation is
enabled.
Table G-1. Action When Flow Control Translation is Enabled
DC1 = ASCII code DC1
DC2 = ASCII code DC2
DC3 = ASCII code DC3
DC4 = ASCII code DC4
CTS = RS-232-C control Clear to Send
RTS = RS-232-C control Request to Send
DTR = RS-232-C control Data Terminal Ready
DSR = RS-232-C control Data Set Ready
FLOW CONTROL (END B)
NONE
TANDEM, CTS-/CTS+,
DSR-/DSR+
DC3/DC1, DC2/DC1,
DC4/DC2, USER,WANG
REVERSE
FLOW
CONTROL
(END A)
NONE
1. Transparent data
transmission including DC1,
DC2, DC3, and DC4.
1. Transparent data
transmission including DC1,
DC2, DC3, and DC4.
1. Transparent data
DC2, DC3, and DC4.
RTS-/RTS+,
DTR-/DTR+
1. Transparent data
transmission including DC1,
DC2, DC3, and DC4.
1. Transparent data
transmission including DC1,
DC2, DC3, and DC4.
2. End B CTS and DSR follow
End A DTR (if local CTS then
End A RTS must be on).
1. Transparent data
DC2, DC3, and DC4.
2. End A DTR signal is
is detected.
DTR in the normal manner.
DC3/DC1,
DC2/DC1,
DC4/DC2,
USER,WANG
1. Reverse Flow Control
characters are reconstructed at
End B with parity as defined at
End B.
1. End B CTS follows End A
Reverse Flow Control State.
XON state.
B.
1. End A XON and XOFF
into End B XON and XOFF