3028 Turbo Statistical Multiplexer
I-20
154001UA
Max Block
Max Block
Max Block
Max Block
Max Block
This parameter selects the maximum block size of the channel frames and is used
for internal buffering only. The 3028 Turbo (CTS 2031 Turbo)
does no checking to
verify that this block size is not exceeded; however, the user should be as accurate
as possible. Choosing a value smaller than the actual maximum block size may
cause the 3028 Turbo (CTS 2031 Turbo)
to underrun excessively to the channel.
Choosing a value larger than the actual maximum block size may cause delays
leading to time-outs.
Front Panel Access
From the
COMMAND MODE
display:
PRESS:
NEXT or LAST
until
CHNL PARAMETERS
displays on the second line
PRESS:
SELECT
PRESS:
NEXT or LAST
to choose a channel number
PRESS:
SELECT
PRESS:
NEXT or LAST
until
CHNL n MAX BLOCK
displays on the second line
PRESS:
SELECT
The LCD displays:
2 03 1I-2 2
CHNL n MAX BLOCK
Where
is 128
256
512
1K
2K
4K
PRESS:
NEXT or LAST
until desired option appears on the second line
PRESS:
SELECT
Terminal Access
To access the
MAX BLOCK
parameter from the Main Menu:
TYPE:
1
PRESS:
RETURN
TYPE:
n (n = channel number)
PRESS:
RETURN
TYPE:
8
from the
CHANNEL PARAMETERS
Menu
PRESS:
RETURN