2. Operation of the 3028
Turbo
Multiplexer
154001UA
2-11
Terminal Access
At initial logon or from
MONITOR MODE
PRESS:
<supervisor logon character>
(default = CTRL + V)
If a password entry is needed, you are prompted to enter the password. After
doing this the Main Menu (figure 2-6) displays:
S Y S T E M M E N U
2 0 3 1 2 -5
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
SET CHANNEL PARAMETERS
SET LINK PARAMETERS
SET SUPERVISORY PARAMETERS
COPY PARAMETERS
CHANNEL STATISTICS
LINK STATISTICS
SET/CLEAR LOCAL CHANNEL LOOPBACK
SET/CLEAR REMOTE CHANNEL LOOPBACK
LOCAL LINK LOOPBACK
RESET A SINGLE CHANNEL
RESET ALL CHANNELS
RESET LINK
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
RESET STATISTICS
CHANNEL VALIDATE
CHANNEL STATUS
REMOTE SIGNON
REMOTE SIGNOFF
SET SYSTEM PASSWORD
SET SYSTEM BANNER
SET SYSTEM TIME
DISABLE/ENABLE FRONT PANEL
ENTER MONITOR MODE
LOGOFF
ENTER 1-23 <CR> TO SELECT DESIRED FUNCTION:
If the Main Menu does not appear, check to make sure the
SUPERVISOR
ENABLED
parameter is set to
YES
(refer to Channel Supervisor Enabled
paragraph).
If the supervisor is currently in use, the message
SUPERVISOR BUSY
is
returned.
Figure 2-6. Command Mode Main Menu
Figure 2-6. Command Mode Main Menu
Figure 2-6. Command Mode Main Menu
Figure 2-6. Command Mode Main Menu
Figure 2-6. Command Mode Main Menu
Command Mode
Command Mode
Command Mode
Command Mode
Command Mode
Definitions
Definitions
Definitions
Definitions
Definitions
LCD
The LCD display is made up of 2 lines with 16 character positions on each line.
An asterisk (
*
) before the channel number selection (Figure 2-7) indicates the
current selection. Use the
NEXT
or
LAST
push button to move the asterisk to
the next or previous option, respectively.
2 0 3 1 2 -5 8
SELECT CHANNEL:
*1 2 3 4 5 6 7 8
Figure 2-7. Asterisk Position Example
Figure 2-7. Asterisk Position Example
Figure 2-7. Asterisk Position Example
Figure 2-7. Asterisk Position Example
Figure 2-7. Asterisk Position Example
