3028
Turbo
Statistical Multiplexer
2-32
154001UA
Channel Break
Channel Break
Channel Break
Channel Break
Channel Break
Propagation
Propagation
Propagation
Propagation
Propagation
The
BREAK PROPAGATION
parameter controls whether or not break signals
are detected and regenerated. A break signal is defined as the space condition
of a line for more than one character time. Once the break condition is detected,
a break-on control message is sent to the remote end causing the break signal to
be regenerated until a break-off control message is received or 2.016 seconds
elapse. Both ends, local and remote, must be programmed the same for proper
operation of this parameter.
Front Panel Access
From the
COMMAND MODE
display
PRESS:
NEXT or LAST
until
CHNL PARAMETERS
displays on the second line
PRESS:
SELECT
PRESS:
NEXT or LAST
to choose a channel number
PRESS:
SELECT
PRESS:
NEXT or LAST
until
CHNL n BRK PROP
displays on the second line
PRESS:
SELECT
the LCD displays:
2 03 12 -7 2
CHNL n BRK PROP
Where
is
NO
YES
PRESS:
NEXT or LAST
until the desired option displays
PRESS:
SELECT
The multiplexer updates the channel Break Propagation and returns the
CHNL
PARAMETERS/CHNL ECHOPLEX
display.
Update the channel echoplex,
PRESS:
MON/CLR
to exit, or
PRESS:
NEXT or LAST
to go to another parameter