![background image](http://html.mh-extra.com/html/patton-electronics/3028-turbo/3028-turbo_installation-and-operators-manual_763457049.webp)
3028
Turbo
Statistical Multiplexer
2-36
154001UA
The multiplexer updates the channel Flyback and returns the
CHNL PARAM-
ETERS/CHNL CTS-RTS
display.
Update the channel CTS-RTS,
PRESS:
MON/CLR
to exit, or
PRESS:
NEXT or LAST
to go to another parameter
Terminal Access
To access the
FLYBACK BUFFERING
parameter from the Main Menu:
TYPE:
1
PRESS:
RETURN
TYPE:
n (n = channel number)
PRESS:
RETURN
TYPE:
12
from the
CHANNEL PARAMETERS
menu
PRESS:
RETURN
The terminal displays:
2 0 3 1 2 -2 0
(ENTER 1-2 <CR> TO CHANGE. <CR> TO RETAIN OLD SETTING.):
CHANNEL n FLYBACK BUFFERING: CURRENTLY: NO
1:
2:
YES
NO
TYPE:
n (n = the flyback buffering option number)
PRESS:
RETURN
The multiplexer updates the channel flyback buffering and returns the
CHAN-
NEL PARAMETERS
menu. If the
RETURN
key is pressed without entering a
flyback buffering option, the Main Menu is returned.
Channel CTS-RTS Control
Channel CTS-RTS Control
Channel CTS-RTS Control
Channel CTS-RTS Control
Channel CTS-RTS Control
The
CTS-RTS CONTROL
parameter allows selection of whether or not the
CTS output is programmed to track the state of the local RTS input. This is
important when used in extremely delay-sensitive applications. This tying of
local CTS output to the local RTS input disables the end-to-end propagation of
DRSS (Data Rate Secondary Select) as CTS. The state of the CTS lead may be
overridden by the manual setting of control leads.
Appendix J provides information in the EIA Signals Exceptions.