manualshive.com logo in svg

Patton electronics 3028 Turbo, Installation And Operator'S Manual

Share
Download
Patton electronics 3028 Turbo Installation And Operator'S Manual Download Page 3

154001UA

i

This manual contains information about the installation and operation of the

3028

Turbo

 (CTS 2031 Turbo) Statistical Multiplexer.  The manual is intended for

use by the technician installing the equipment and the operator using the equip-

ment.  This manual assumes that its user is familiar with basic telecommunica-

tions and computer terminology.

AUDIENCE AND

AUDIENCE AND

AUDIENCE AND

AUDIENCE AND

AUDIENCE AND
OBJECTIVES

OBJECTIVES

OBJECTIVES

OBJECTIVES

OBJECTIVES

2980-A2-GN30

DCX 840 Installation, Operation and Maintenance Manual

2985-A2-GN30

DCX 840 Installation, Operation and Maintenance Manual

RELATED DOCUMENTS

RELATED DOCUMENTS

RELATED DOCUMENTS

RELATED DOCUMENTS

RELATED DOCUMENTS

The information contained herein is proprietary and confidential to 

Patton

Electronics Co.

  Any reproduction or redistribution of this publication, in whole or

in part, is expressly prohibited unless written authorization is given by 

Patton

Electronics Co.

PROPRIETARY NOTICE

PROPRIETARY NOTICE

PROPRIETARY NOTICE

PROPRIETARY NOTICE

PROPRIETARY NOTICE

Patton Electronics Co. (hereafter referred to as Patton) warrants that its equipment

is free from any defects in materials and workmanship.  The warranty period shall

be two years from the date of shipment of equipment.  Patton’s sole obligation

under its warranty is limited to the repair or replacement of the defective equip-

ment.  This warranty will not extend to equipment subjected to accident, misuse,

alterations or repair not made by Patton or authorized by Patton in writing.

All warranty and non-warranty repairs must be returned freight prepaid and

insured to Patton Electronics.  All returns must have a Return Materials Authoriza-

tion number on the outside of the shipping container. This number may be ob-

tained from Patton Electronics Technical Services at:

Tel:  (301) 975-1007;

email:  [email protected];

or, Web:  http://www.patton.com.

NOTE:  Packages received without an RMA number will not be accepted.

Patton Electronics’ technical staff is also available to answer any questions that

might arise concerning the installation or use of your Patton devices.  Technical

Service hours: 8AM to 5PM EST, Monday through Friday.rations or repair not

made by Patton or authorized by Patton in writing.

PUBLICATION NOTICE

PUBLICATION NOTICE

PUBLICATION NOTICE

PUBLICATION NOTICE

PUBLICATION NOTICE

This manual has been compiled and checked for accuracy.  The information in this

manual does not constitute a warranty of performance.  Patton reserves the right to

revise this publication and make changes from time to time in the content thereof.

Patton assumes no liability for losses incurred as a result of out-of-date or incorrect

information contained in this manual.

DCX

 is a trademark of AT&T Paradyne.

ENQ/ACK

 is a registered trademark of Hewlett-Packard Corporation.

Paradyne

 in a registered trademark of AT&T Paradyne.

Tandem

 is a registered trademark of Tandem Corporation.

T-Pause

 is a registered trademark of Tandem Corporation.

Wang

 is a registered trademark of Wang Laboritories, Inc.

2030 Statistical Multiplexer

 is a registered trademark of AT&T Paradyne.

Preface

Preface

Preface

Preface

Preface

SERVICE

SERVICE

SERVICE

SERVICE

SERVICE

Summary of Contents for 3028 Turbo








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands