2. Operation of the 3028
Turbo
Multiplexer
154001UA
2-15
Channel Parameters
Channel Parameters
Channel Parameters
Channel Parameters
Channel Parameters
The
CHANNEL PARAMETERS
command is used to change or examine any of
17 programmable parameters on any of the available channel ports or the
supervisory port.
Front Panel Access
From the
COMMAND MODE / CHANNEL PARAMETER
display:
PRESS
:
SELECT
The LCD Displays:
2 0 3 1 2 -5 8
SELECT CHANNEL:
*1 2 3 4 5 6 7 8
PRESS
:
NEXT or LAST
to select a channel
PRESS
:
SELECT
The asterisk (*) before the channel number indicates the channel which is
accessed.
The LCD will now display:
2 03 12 -6 1
CHNL PARAMETERS
Where
is CHNL n SPEED
CHNL n TYPE
CHNL n DATA BITS
CHNL n STOP BITS
CHNL n PARITY
CHNL n FL CTL
CHNL n RV FL CTL
CHNL n FL CTL TR
CHNL n EIA PROP
CHNL n BRK PROP
CHNL n ECHOPLEX
CHNL n FLYBACK
CHNL n CTS-RTS
CHNL n MSGS ENAB
CHNL n SPVR ENAB
CHNL n INAC DISC
CHNL n DISC CHAR