A. Multiplexer Command Mode Summary
154001UA
A-1
Command Mode Use ................................................................................................................................ A-1
Front Panel Access ........................................................................................................................... A-1
Terminal Access ............................................................................................................................... A-1
A.
A.
A.
A.
A. Multiplexer Command Mode Summar
Multiplexer Command Mode Summar
Multiplexer Command Mode Summar
Multiplexer Command Mode Summar
Multiplexer Command Mode Summaryyyyy
This appendix summarizes the usage of the
COMMAND
mode commands,
listing each parameter available for change and its options, in a flowchart
format, in the order they are displayed.
COMMAND
COMMAND
COMMAND
COMMAND
COMMAND
MODE USE
MODE USE
MODE USE
MODE USE
MODE USE
Front Panel Access
Front Panel Access
Front Panel Access
Front Panel Access
Front Panel Access
The
COMMAND
mode is entered by pressing the NEXT push button from the
MONITOR
or
STANDBY
modes. After entering the
COMMAND
mode the
commands are listed on the second line of the display. The NEXT or LAST
push buttons will advance through the commands, forward or backwards
respectively, changing the second line display accordingly. To access the
command parameters, press the SELECT push button. The command is dis-
played on the first line and the parameter is displayed on the second line. Use
the NEXT or LAST push button to scroll through the parameters. Use the
SELECT push button to access the parameter options. The parameter is dis-
played on the first line and the options are displayed on the second line. The
NEXT and LAST push buttons will scroll through the options. The SELECT
push button will update the multiplexer. The MON/CLR push button can be
used at any time to exit to the
COMMAND
mode display without updating
parameter values.
SUPERVISOR
mode is entered by pressing the <
supervisor logon character
> from
a port that has the supervisor enabled. If the password has been previously
programmed, a prompt is displayed. If a password is not in use, the Main
Menu is displayed.
After the Main Menu is displayed, menu items can be selected by typing the
number before the item and pressing RETURN. This will display a second-level
menu, a list of options, or instructions for command usage. The RETURN key
can be used at any time to exit the Main Menu.
Terminal Access
Terminal Access
Terminal Access
Terminal Access
Terminal Access
Note
The following flowchart is designed to be
used by anyone with operating experience
on the 3028
Turbo (CTS 2031 Turbo)
multiplexer. It should be used as a
reference tool for configuration.