Parker V402EP, Assembly

Page: 70 / 78

BP
1
12 14
BP
14 12
5
1
3
2
4
5 3
1
Mounting Studs
Valve
Sandwich
Block
3 1
BP2 12
5
BP4
14
F & H Selector Regulator Installation V-449P
Using Model No.
Plug Locations
Using Attributes of Valve & Operator(s)
to Determine Plug Locations to Determine Plug Locations
3rd Digit 6th Digit
Pilot Supply Holes
Pilot Supply
Main Press Control Mechanism
in Model No. in Model No.
1 3 5 BP4 BP2 12 14
Supply Type Operator Types
B or C M M X X Internal @ Port 1
P or Q X M M X External @ Port 12 Single
L or M X M M X External @ Port 14
1, 2, 5, 6 B or C M M X X Internal @ Port 1
All Solenoids
7 or E E or F X X X X Internal @ Port 3
H or J X X X X Internal @ Port 5
Dual
P or Q X M M X External @ Port 12
L or M X M M X External @ Port 14
0 or C M M X X Internal @ Port 1
P or Q X M M X External @ Port 12 Single
3 or F L or M X M M X External @ Port 14
Single Air
E or F X X X X Internal @ Port 3
Pilot
H or J X X X X Internal @ Port 5
Dual
4, 8, 9, 0 0 M M X X None Single or Dual Double Air Pilot
Key Code: X = Pilot hole must be plugged. M = Pilot holes may be molded shut and will not need a plug; however some holes may be open and therefore
Blank = Pilot hole must be left open. will require a plug. Use a probe to test if holes are open - the probe must be able to pass through the
thickness of the sandwich block for the holes to be open.
Sandwich Block Pilot Plug Locations
(See Table Below)
Valve / Sandwich Torque
Mounting Specifications
Torque .............................................. 25 to 35 lb. in. (3 to 4 Nm)
Selector Regulator -
External Pilot - Port 14
Manifold Port Isolation
F5 Shown
Sandwich Regulator Mounting Stud Kit -
PS3540P
14
12
14
12
14
12
Select appropriate gasket to
block external pilot galley for
special piloting applications.
PS353300BP
PS353301BP PS353302BP
For all Instruction Sheets, go to www.parker.com/pneumatic
Instruction Sheets Available:
V-402CP - F & H ISO 5599-2 Solenoid Service
V-440P
- F & H ISO 5599-2 Valve Installation
V-441P - F & H ISO Valve Service
V-442P - H ISO 5599-1 Auto Valve Installation
V-443BP - F & H ISO 5599-2 Manifold Installation
V-444P
- H ISO 5599-1 CNOMO Valve Installation
V-445P - F & H ISO Flow Control Installation
V-446P - F5/H1 Sandwich Regulator
V-447P - F6/H2 & F7/H3 Sandwich Regulator
V-449P - F & H Selector Regulator Installation