2
4
5
3
1
Pilot Isolation Plug Kit
Auxiliary Access Manifold Only
PS3433P (2)
2
4
9
9
18
10
11
11
16
15
17
Auxiliary Access Manifold (F5 / H1 Valves Only)
The Auxiliary Access Manifold provides auxiliary access to the
#1, #3 and #5 ports. Kit includes Access Manifold, Gasket and
all related hardware.
(F5/H1 Valves Shown)
Item #
Description
9
Manifold Base (F5 / H1)
10
Molded Gasket
11
Tie Rod
15
Pilot Isolation Plug
16
Access Manifold Gasket
17
Jumper Harness
18
Access Manifold
F & H ISO 5599-2 Manifold Bases With Interconnect Wiring
V448BP
Remote Pilot Access Plate
The Remote Pilot Access Plate provides access to the #12
and #14 valve pilot galleys for an F5 / H1, F6 / H2 & F7 / H3
manifold. It is required for Single or Double Remote Pilot Valves
on a manifold. It is included when you order the valve/manifold
combination, not included with valve only. Hand tighten the tie
rods into the base.
4 of 4
Valve Series
F5 / H1
F6 / H2
F7 / H3
Torque - in. lb.
25 to 35
115 to 130
120 to 140
(Nm)
(2.8 to 3.9)
(12.9 to 14.7)
(13.6 to 15.8)
Hi-Flow Manifold Repair Kits
Kit Number
Description
PS3512BP
H1 / F5 Manifold Tie Rod (12)
PS3513BP
H1 / F5 Manifold to Manifold Gasket (1)
PS3612P
H2 / H3, F6 / F7 Manifold Hardware (12)
PS3613P
H2 / F6 Manifold to Manifold Gasket (1)
PS3713P
H3 / F7 Manifold to Manifold Gasket (1)
For all Instruction Sheets, go to www.parker.com/pneumatic
Instruction Sheets Available:
V-402 - F & H ISO 5599-2 Solenoid Service
V-440 - F & H ISO 5599-2 Valve Installation
V-441 - F & H ISO Valve Service
V-442 - H ISO 5599-1 Auto Valve Installation
V-443 - F & H ISO 5599-2 Manifold Installation
V-444 - H ISO 5599-1 CNOMO Valve Installation
V-445 - F & H ISO Flow Control Installation
V-446 - F5/H1 Sandwich Regulator
V-447 - F6/H2 & F7/H3 Sandwich Regulator
V-448 - F5/H1, F6/H2 & F7/H3 Interconnect Wiring
V-449 - F & H Selector Regulator Installation
Station Blanking Plate
Use top Blanking Plate on a Manifold to reserve a place for a
valve that will be added later to the manifold bank or to remove
a valve from a manifold without having to remove the manifold
block from the manifold bank.
Place Gasket and Blanking Plate on Manifold and assemble
using Mounting Screws provided with kit. Tighten screws to
torque specifications shown in the torque chart.
Apply main pressure and check for leaks. If any are present,
do not operate valves on the manifold bank - repeat the
assembly process until satisfactory.
2
4
O-ring Seal
Only for PS3627***P
and P3727***P
at Gallery 3
2
4
A
B
F5/H1
Manifold
Base
F6/H2
Manifold
Base
Pilot Gallery
O-rings
F6/H2
O-Rings
F5/H1
Molded
Gasket
F5/H1
Tie Rods
Jumper
Harness
Figure 7
2
4
14 12
Smaller
Manifold
Larger
Manifold
Transition
Plate
Left
Right
Transition
Gasket
F3 to F5
R
F3 to F6
R
F5 / H1 to F6 / H2 L
F5 / H1 to F7 / H3 L
F6 / H2 to F7 / H3 L
F6 / H2 to H4
L
F7 / H3 to H4
L
Isolator Plug Location with Transition Plates
