7-2
Installation & Connection
AC10 Inverter
Model
Sketch
1-phase 230V
0.4kW
～
2.2kW
3-phase 230V
0.4kW
～
2.2kW
3-phase 400V
0.4kW
～
15kW
Note: power terminals L1, L2 of single-phase 230V 0.4-2.2kW are connected to 230V of power
grid;
Introduction of terminals of power loop
Terminals
Terminal
Marking
Terminal Function Description
Power Input Terminal
R/L1,
S/L2, T/L3
Input terminals of three-phase 400V AC voltage
(R/L1 and S/L2 terminals for single-phase)
Output Terminal
U, V, W
Inverter power output terminal, connected to
motor.
Grounding Terminal
Inverter grounding terminal.
Braking Terminal
P, B
External braking resistor (Note: no Terminals P
or B for inverter without built-in braking unit).
P, -
DC bus-line output
External connections to optional braking unit
P connected to input terminal “P” or “DC+”of
braking unit,
- connected to input terminal of braking unit “N”
or “DC-”.
Control loop terminals as follows:
TA TB TC D01 24V CM DI1 DI2 DI3 DI4 DI5 10V AI1 AI2 AO1 GND A+ B-
L
1
L
2
P/+
B U V W
~220-240V
Braking
resistor
3-phase output
PE/
L
1
L
2
P/+ B U V W
~220-240V
Braking
resistor
3-phase output
L
3
PE/
P
U
V
W
Braking resistor
～
400V
B
Grounding
Input
TC-Hydraulik - R
ü
sdorfer Str. 8 - 25746 Heide - Lars Lornsen - T: +49 481 909 - 34 - [email protected] - www.tc-hydraulik.de
