5-1
The Keypad
AC10 Inverter
Chapter 5
The Keypad
5.1 The Display
Keypad panel and monitor screen are both fixed on the keypad controller. See Figure 5-1
Keypad Displays.
Figure 5-1 Keypad Displays
5 indicators indicate working status. ALM is ON when
fault occurs. LOC/REM is ON in the remote-controlling
status. Hz is ON when frequency is shown, A is ON when
current is shown, and V is ON when voltage is shown.
Function code
Press
for function code, and
for original
parameters.
,
▲
and
▼
keys can be used to
select function codes and parameters. Press
again to confirm. In the mode of keypad control,
▲
and
▼
keys can also be used for dynamic speed
control.
key and
keys control start and
stop. Press
key to reset inverter in fault status.
Press
Key to set Fwd/Rev jogging and select
local/remote control.
FWD/REV indicator
The runnining indicator is ON whilte running.
TC-Hydraulik - R
ü
sdorfer Str. 8 - 25746 Heide - Lars Lornsen - T: +49 481 909 - 34 - [email protected] - www.tc-hydraulik.de
