Paradyne COMSPHERE 3800 Series, User Manual

Page: 207 / 213

COMSPHERE 3800 Series Modems
Index-2 September 1998 3810-A2-GB30-30
Auto Redial (DTR), 14-18
Auto Redial (Leased Line), 14-17
Auto–Answer Ring Number (S0), 14-15
Auto-Answer Ring Count, 9-20
Automatic Firmware Download Center, 10-6
Automatic Make Busy, 9-24
automatic redialing, 9-19, 9-24, 9-31, 14-18
AutoSync, 14-10
B
Backspace Character, 9-17
Backspace Character (S5), 14-16
Bad Lines Auto Originate, 9-30
Bad Lines Auto Originate (S46), 14-20
Bell Mode, 14-3
Blind Dial Pause, 9-21
Blind Dial Pause (S6), 14-16
Break Buffer Control, 9-37
Break Forces Escape, 9-16
Busy Tone Detect, 9-21
C
cables
carrier–mount, 3-2
standalone, 2-3
Call Answer commands (V.25bis), F-2
Call Request commands (V.25bis), F-1
Call Response (V.25bis), F-2
Call Setup branch, 5-1
Carriage Return Character, 9-16
Carriage Return Character (S3), 14-15
Carrier On Level, 9-32
Cellular (Mobile), 9-44
Cellular Enhancement, 9-38
Cellular Enhancements (S91), 14-26
Cellular RJ11 Adapt, 9-44
Cellular RJ11 Adapt (S93), 14-26
Change Directory, 5-5
character format, 14-2, C-4
Choose Function, 9-5
Clone to Remote, 10-4
Command Character Echo, 9-16
Command Echo (E), 14-4
command entry guidelines, 14-2
Command mode, 14-1
command responses (V.25bis), F-3
COMSPHERE 6700 Series NMS, 1-1
connection, 2-7
configuration options, 9-7–9-46
Dial Line, 9-25
DTE Interface, 9-7
editing and saving, 9-5
error control, 9-33
factory default, G-1
for cellular, 14-8
Leased Line, 9-28
Line Dialer, 9-20
Miscellaneous, 9-41
saving, 14-11
Security, 9-45
selecting, 4-13
Tests, 9-39
V.42/MNP/Buffer, 9-33
viewing, 14-11
Configure branch, 9-4
connection
ac power, 2-7
COMSPHERE 6700 Series NMS, 2-7
dial-line, 2-4
DTE, 2-6
leased-line, 2-4
telephone, 2-7
Control branch, 10-1
CT111 Rate Control, 9-14
CT111 Rate Control (S61), 14-22
CTS Control, 9-12
CTS Control (\D), 14-12
Customer configuration areas, 9-1
D
Data Bits, 9-8
Data mode, 14-1, 14-5
data rate (%B command), 14-13
data rate (dial line), 9-25
data rate (leased line), 9-28
DCP (Diagnostic Control Panel), 2-1
description, 4-1
Hidden Choice Indicators, 4-6
keypad, 4-6
operation, 4-6
security access, 4-15
shared, 4-3
types, 4-1
using to change factory presets, 4-13
default configuration options, 4-13, 14-8, G-1
setting with AT commands, 4-13
setting with DCP, 4-13
Dial, 5-2
dial backup, C-4
Dial command, 14-3
Dial Command modifiers, 14-3
“!” (hook flash), 5-6
“,” (pause), 5-6
“;” (return to Command mode), 5-6
P (Pulse dial), 5-6, 9-20, 14-3
R (Reverse), 5-6
T (Tone dial), 5-6, 9-20, 14-3
W (Wait), 5-6
Dial Line Rate, 9-25, 14-19
Dial Standby/Return to Dial, 5-4
Dial Stored Number (DS), 14-4
Dial Tone Detect, 9-20
Dial Transmit Level (&I), 14-9
Dial Transmit Type, 14-9
Dialer Type, 9-20
Directory Location 1 Callback, 9-42
Directory Location 1 Callback (S67), 14-23