Panasonic Workio DP-C401 Page 168 Service Handbook Download

Page: 168 / 548

3-94

Chapter 3 Troubleshooting

016-716 Unable to Spool TIFF Data

[Detection Conditions]

The files to be spooled in the TIFF exceeded the disk
capacity.

[Actions]

Install the HDD or increase the capacity of the HDD,
etc.

016-718 SHORT_OF_SIF_PCL6_MEMORY [FXAP

Only]

[Detection Conditions]

MEMORY shortage detected.

[Actions]

Replace MEMORY.

016-719 SHORT_OF_SIF_PCL_MEMORY [FXAP

Only]

[Detection Conditions]

Memory shortage detected when using PCL.

[Actions]

Increase PCL memory size.

016-721 Other Errors

[Detection Conditions]

An unexpected error has occurred during printing.

[Actions]

Execute the same job again to check the error status.

016-726 Cannot Switch Decomposer <Auto

Judgement Error>

[Detection Conditions]

Print Language Auto Judgement

Error

[Actions]

Fix and select the Decomposer from the Operation
Panel or with a command.

016-728 Unsupported TIFF Data

[Detection Conditions]

Unsupported TIFF Data
The data contains a Tag that is not set in the Image
File Expansion Library.

[Actions]

Delete the unsupported Tag from the data and retry
printing again.

016-729 TIFF Data Size is too Big

[Detection Conditions]

TIFF Data Size is too Big
The specified settings exceed the upper limit of the
valid number of colors and pixels.

[Actions]

Correct to a valid range, etc.

016-731 Invalid TIFF Data

[Detection Conditions]

Invalid TIFF Data (TIFF Data is broken or cut off
halfway.

[Actions]

Resend the data, etc.

016-735 Updating Job Template

[Detection Conditions]

Updating Job Template
The system tried to output the Job Template List while
the Job Template was being updated.

[Actions]

Perform the operation again after the Job

Template update has completed.

016-737 Job Template Server Read Error

[Detection Conditions]

Job Template Server Read Error
Read error from the Job Template Pool Server

[Actions]

(1) Check that "Authorization to read" is established for

the storage destination server directory set as
resource.

016-739 Invalid Job Template Server Path

[Detection Conditions]

Invalid Job Template Server Path
The specified path of the Job Template Pool Server
cannot be found.

[Actions]

(1) Set the resource of the storage destination path from

a client PC on the CentreWare.

016-740 Job Template Server Login Error

[Detection Conditions]

Job Template Server Login Error
Cannot log in to the Job Template Pool Server.

[Actions]

(1) Set the log-in name and password in the Job

Template file storage destination.

(2) From some other PC connected to the network,

check that you can log in with the above account.

(3) Set the log-in name and password as a resource

from the CentreWare client PC.

016-741 Job Template Server Connect Failure

[Detection Conditions]

Job Template Server Connect Failure
Cannot connect to the Job Template Pool Server.

[Actions]

(1) Connect the cable from the M/C to a network

correctly.

(2) From the destination server, check that you can

identify the M/C with "ping", etc.

(3) Perform the "ping" test on the destination server

from PSW.

(4) From a client PC to check that the ftp connection to

the destination server is possible.

Summary of Contents for Workio DP-C401





































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Workio DP-C401

Reviews:

Related manuals for Workio DP-C401

Brands by name

Popular brands

Panasonic Workio DP-C401, Service Handbook

Search results

Summary of Contents for Workio DP-C401

Reviews:

Related manuals for Workio DP-C401

Brands by name

Popular brands