3-309
Chapter 3 Troubleshooting
[Initial Value]: Auto
[Setup Range]: -
[Read/Write]: Read/Write
[Description]:
0x7F: Auto, 2: 100BASE-TX,
1: 10BASE-T
2: 100BASE-TX
10. 770-030
[NVM Name]: Operation Frame Type Setting
[PSW Display]: NetWare Frame Type
[Initial Value]: Auto
[Setup Range]: -
[Read/Write]: Read/Write
[Description]:
255: Auto
2: Ethernet II
4: Ethernet SNAP
3: Ethernet 802.2
1: Ethernet 802.3
11. 770-040
[NVM Name]: Enable Setting
[PSW Display]: EtherTalk Port Enable
[Initial Value]: Disable
[Setup Range]: 0~1
[Read/Write]: Read/Write
[Description]:
0: Disable
1: Enable
12. 770-041
[NVM Name]: Print Mode
[PSW Display]: EtherTalk Print Type
[Initial Value]: PostScript
[Setup Range]: -
[Read/Write]: Read/Write
[Description]: PostScript
13. 770-042
[NVM Name]: JCL Switch is set as PJL Switch
[PSW Display]: EtherTalk JCL Enable is EtherTalk PJL Enable
[Initial Value]: ON
[Setup Range]: FALSE~TRUE
[Read/Write]: Read/Write
[Description]:
0: Off
1: On
14. 770-050
[NVM Name]: Start Up Setting
[PSW Display]: Netware Port Enable
[Initial Value]: Stop
[Setup Range]: -
[Read/Write]: Read/Write
[Description]:
0: Stop
1: Start Up
15. 770-051
[NVM Name]: Print Mode
[PSW Display]: Netware Print Mode Type
[Initial Value]: Auto
[Setup Range]: -
[Read/Write]: Read/Write
[Description]:
1:Auto, 3:HPGL2, 5:PostScript, 2:PCL6
16. 770-052
[NVM Name]: JCL Switch
[PSW Display]: Netware JCL Enable is Netware PJL Enable
[Initial Value]: ON
[Setup Range]: FALSE~TRUE
[Read/Write]: Read/Write
[Description]:
0: Cannot be used
1: Can be used
17. 770-053
[NVM Name]: Filter
Summary of Contents for Workio DP-C401
