background image

77

FTP

A protocol that is commonly used for transferring files 

over the Internet.

Firewall

A type of security used when accessing outside net-

works like the Internet. A PC is used to prevent comput-

ers outside a local network from accessing the network.

Full Duplex

Communications method that allows simultaneous 

sending and receiving by transmitting in both directions 

using an independent sending line and receiving line.

Global Address

IP address assigned to each device connected to the 

Internet that is equivalent to an address on the Internet. 

IP address is required for Internet communications.

HDD

Abbreviation for hard disk drive, a type of mass storage 

device.

Camera images are recorded onto a hard disk drive.

HTML

HTML is a markup language used for describing the log-

ical structure of a document and its appearance. Links 

to images, audio, video and other documents can be 

inserted into the document. A web browser is used to 

view documents written in HTML.

Half Duplex

Communications method that switches between send-

ing and receiving using a single communications line.

IP Masquerading

A technology for sharing a single global address 

between two or more PCs. Allows simultaneous connec-

tion of multiple machines to 1 global address to dynami-

cally convert NAT and different TCP/UDP port numbers.

IP address

The identification number assigned to PCs connected 

via IP networks such as the Internet or an Intranet, or to 

individual communications devices. Do not assign the 

same address to multiple devices, especially on the 

Internet.

     

Internet

PC network that connects networks all over the world. 

Different types of PCs can communicate over the 

Internet.

LAN

A communications network for connecting PCs, printers 

and other network devices in a relatively small area 

such as in a building or floor of a building or campus in 

which data is transferred.

M-JPEG

Video format in which the camera sends continuous 

JPEG images.

Compared with sending images from the camera one at 

a time, this method reduces the load on the network. 

However, the transfer rate may change depending on 

the status of the camera. Images may be represented 

as a JPEG depending on the camera.

MAC address

Fixed physical address assigned to network devices. 

Devices send and receive data based on this.

Manual recording

Click the [Recording] button and the [Recording stop] 

button to manually start and stop recording of video and 

audio.

Multicast

A way to send the same data to multiple users specified 

on a network.

Multiscreen Display

This recorder can display multiple camera channels 

simultaneously while displaying live images or playback 

images.

NAT (Network Address Translation)

A technology for sharing a single global address 

between two or more PCs.

NTP (Network Time Protocol)

A protocol developed to accurately maintain time among 

hosts on the Internet.

POP 3

A protocol for receiving e-mail stored on a server on the 

Internet or an Intranet.

     

Summary of Contents for WJ-ND400K/G




















































































Reviews: