65
Description of error
Error log
Network log
LCD
Output from
connector
HTTP request invalid
–
<HTTP>REQUEST_
ERR
–
Network error out-
put
Other errors for HTTP
–
<HTTP>OTHER_
ERR
–
Network error out-
put
Move to Config
–
–
CONFIG
–
Camera SD memory
card error
CAM cc SD ERR
–
NW ERR CAMERA cc
SD ERROR
Camera error out-
put
Request to start writing
on the camera SD
denied
CAM cc SD START
ERR
–
NW ERR CAMERA cc
SD ERROR
Camera error out-
put
Request to finish writing
on the camera SD
denied
CAM cc SD END
ERR
–
NW ERR CAMERA cc
SD ERROR
Camera error out-
put
Request to obtain a
data list on the camera
SD denied
CAM cc GET LIST
ERR
–
NW ERR CAMERA cc
SD ERROR
Camera error out-
put
Request to obtain SD
memory data on the
camera SD denied
CAM cc GET IMG
ERR
–
NW ERR CAMERA cc
SD ERROR
Camera error out-
put
Request to delete SD
memory data on the
camera SD denied
CAM cc DEL IMG
ERR
–
NW ERR CAMERA cc
SD ERROR
Camera error out-
put
*1 "HDD Remove error" is an error that is recognized when a hard disk drive is removed without pressing the [USE]
button during the operation.
*2 In the RAID 5 or RAID 6 mode, only "Error log" is displayed, but neither "Indication on the LCD" nor "Output from
the connector at the rear panel" is displayed.
*3 "HDD SKIP" is the function that continues recording even when an error occurs, such as an HDD write error, by
recording images on the next hard disk drive.
*4 "Video loss" is an error that may occur between the WJ-NT304, WJ-NT314 and the camera connected to the
WJ-NT304.To make the WJ-ND400 detect a video loss error, it is necessary to configure the settings for
"Panasonic alarm protocol" of the WJ-NT304/WJ-NT314 and the settings for "Site alarm" of the WJ-ND400.
Refer to page 67 for information about the parameters used on the table above.
