31
Control cameras
When displaying live images from a camera with the
panning/tilting function on a 1-screen, the following
camera controls are available. It may be impossible to
operate the camera or some functions may be inopera-
ble depending on the model of the camera.
Pan/tilt:
Adjust the horizontal/vertical position of the
camera.
Zoom:
Zoom in/out the displayed image.
Focus:
Adjust the focal point.
Brightness:
Adjust the lens iris (brightness).
Preset position operation:
Move the camera to the
preset position (that is determined on the camera's
setup menu and registered in the recorder).
Auto mode:
Activate the designated auto function of the
camera.
Panning/tilting operation
Adjust the horizontal/vertical position of the camera.
1
Click the [CAM] tab.
Control buttons:
Click to move (pan/tilt) a camera in
the clicked direction.
Control pad:
Click to move (pan/tilt) a camera in the
clicked direction. Panning/tilting speed will be faster
if a clicked point gets farther from the center point of
the control pad.
Image display area:
Click the desired point to be locat-
ed at the center of the angular field of view.
The camera will move to locate the clicked point as
the center point in the image display area.
Zoom/focus/brightness adjustment operation
Adjust the zoom, focus, and brightness of live images.
Zoom:
Zoom in/out the displayed image. Depending on
the models of the connected cameras, the available
zooming factors may be different. Refer to the oper-
ating instructions of the camera in use for further
information.
Focus:
Adjust the focal point. The auto focus function is
available.
Brightness:
Adjust the lens iris (brightness). The adjust-
ed lens iris can be reset.
1
Click the [CAM] tab.
Zoom:
Zooming can be adjusted by clicking the [-] but-
ton or the [+] button.
Click the [x1] button to reset zoom.
Focus:
Focusing can be adjusted by clicking the [Near]
button or the [Far] button.
The auto focus function can be performed by click-
ing the [Auto] button.
Brightness:
The brightness can be adjusted by clicking
the [-] (darker) button or the [+] (brighter) button.
It is possible to reset the set brightness by clicking
the [Reset] button.
Note:
• It is also possible to adjust the zoom factor by rotat
-
ing the wheel button of the mouse.
