Panasonic WJ-ND400K/G Operating Instructions Manual Download

Page: 54 / 83

Transmit images

Transmit images from cameras to an

FTP Server

It is possible to transmit images from cameras to an

FTP server.

Image transmission can be performed at a designated

time periodically (FTP transmission by periodic timer) or

at an event occurrence (FTP image transmission by

alarm).

Transmit images from cameras

periodically

It is necessary to perform the settings on the setup

menu in advance to transmit images from cameras to

an FTP server periodically.

The settings relating to "Image transmission by periodic

timer" such as FTP server directory, transmission inter-

val, source camera channel, etc. can be performed on

the setup menu ("Server" - "FTP" - "Image transmission

by periodic timer").

Refer to the setup instructions (PDF) for information on

how to configure the settings.

When the image compression method of the camera

used for the camera channel selected for "Channel to

send" (under "Image transmission by periodic timer" of

"FTP" on the "Server" page) is "MPEG-4", images will

not be transmitted.

Transmit images from cameras at an

event occurrence

It is necessary to perform the settings on the setup

menu in advance to transmit images from cameras to

an FTP server at an event occurrence.

The settings relating to "FTP image transmission by

alarm" such as FTP server name, "Duration-Pre",

"Duration-Post", etc. can be performed on the setup

menu ("Server" - "FTP " - "Image transmission by

alarm").

Refer to the setup instructions (PDF) for information on

how to configure the settings.

Send mails

A mail that notifies of the event occurrence with the time

and date of the event occurrence will be sent. (Alarm

mail)

To send alarm mails at an event occurrence, configure

the settings in advance. Refer to the setup instructions

(PDF).

Note:

• It is possible to attach an image to the alarm mail.

(Alarm image)

• Up to 4 destination addresses of the alarm mail can

be registered.

Summary of Contents for WJ-ND400K/G




















































































Search results

Summary of Contents for WJ-ND400K/G

Reviews:

Related manuals for WJ-ND400K/G

Brands by name

Popular brands

Panasonic WJ-ND400K/G, Operating Instructions Manual

Search results

Summary of Contents for WJ-ND400K/G

Reviews:

Related manuals for WJ-ND400K/G

Brands by name

Popular brands