55
Check the system/disk information
Check information about the system and the hard disk drives of the recorder.
System information
Versions of the software, the hardware (this recorder),
MAC address, serial number, temperature inside the
recorder and software version of the connected exten-
sion unit will be displayed.
1
Click the [Setup] button.
2
Click the [Maintenance] button and then click
[Product information].
Disk information
The disk size and the available capacity of the hard disk
drives of the recorder and the extension unit (EXT1-5)
will be displayed. It is also possible to check the time
range of the images recorded on the selected hard disk
drive. Refer to the setup instructions (PDF) for further
information about the hard disk drives in the recorder.
Settings for the hard disk drive lifetime warning time
(hour meter) can be performed on this menu.
1
Click the [Setup] button.
2
Click the [Maintenance] button and then click the
[Disk information] tab.
The "Disk information” page will be displayed.
3
Click the [Display] button on the "Disk informa-
tion" page.
The disk capacities of each hard disk drive, hour
meter, and time and date range of recorded images
saved on each hard disk drive will be displayed.
