Panasonic Windea VGD13113W Simple Manual Download Page 84

Page: 84 / 118

●

The gas detector fault icon will turn off after

approximately 1 minute, and the area around

the MENU button will flash in red.

●

If the gas detector is reconnected or the

removed gas detector is reinstalled, the alarm

stops, and the area around the MENU button,

GAS indicator, and door phone alarm display

indicator turn off.

●

After pressing the STOP ALARM button,

touching on the base unit will cause
the screen to return to the waiting state, and
the area around the MENU button will light up
in red. To display the gas detector fault icon,
touch on the Top Menu screen.
( Pages 20 to 21)

●

The GAS indicator appears only on the base unit.

●

The GAS indicator continues to appear, the area
around the MENU button continues to appear or
flash, and the alarm display indicator continues
to flash until the detector or detector wiring is
reconnected.

●

The gas detector fault icon can also be turned off
within 1 minute. ( Page 155)

●

The ventilation icon will turn off after

approximately 3 minutes, and the area around

the MENU button will flash in red.

●

Once the imperfect combustion state is no

longer detected, the alarm stops. Also, the

area around the MENU button, ALARM

indicator on the call sub-base unit alarm

indicator, and door phone alarm display

indicator turn off.

●

The area around the MENU button, ALARM
indicator, and alarm display indicator continue
to flash until the imperfect combustion state
(carbon monoxide) is no longer detected by the
gas/CO detector.

●

The ventilation icon can also be turned off
within 3 minutes. ( Page 155)

162

163

When the gas detector is disconnected or removed, the system reports a fault.

In the Event of Imperfect Combustion

In the Event of a Gas Detector Fault

Ventilation icon

flashes in red

When the imperfect combustion state (carbon monoxide) is detected by the gas/CO detector,
the system reports a fault.

Door phone

Alarm display indicator

Flashes in red
Alarm is sounding

How to stop the alarm sound

Procedures during alarms

This function is only available when using gas detectors with CO alarm functionality.

MENU button

Call sub-base unit

ALARM indicator

Flashes in red
Alarm is sounding

Door phone

Alarm display indicator

Flashes in red
Alarm is sounding

Gas detector fault

icon appears

in red

GAS

indicator

appears

in yellow

●

Press the STOP ALARM button.

(The alarm can also be turned off from

the building manager room.)

How to stop the alarm sound

Procedures during alarms

MENU button

Confirm button

Call sub-base unit

Alarm is sounding

In the Event of a Gas Leak or Disconnection

The alarm can be disabled.

Consult with the management

company or the company that

installed the system.

●

Press the STOP ALARM button. Note that the

gas/CO alarm will not turn off. (The alarm can

also be turned off from the building manager

room.)

●

Open the windows and doors to ventilate the

room.

●

Stop using the devices causing the incomplete

combustion state.

●

If the alarm does not stop, contact the store

where purchased or your nearest gas store.

●

If the gas detector is not experiencing a fault

such as the device being removed or a breaker

being tripped, contact your apartment manager

or system installer.

Note

INTRODUCTION

USUAL USAGE

SETTING ACCORDING TO

YOUR PREFERENCES

OPERATIONS AND MEASURES

WHEN ALARM GOES OFF

SECURITY ALARM SETTING

AND DISARMING

RECORD

MANAGEMENT

OTHER

Installer

Setting

復旧/警報音停止

RESET/ STOP ALARM

電源

POWER

ガス

GAS

復旧/警報音停止

RESET/ STOP ALARM

電源

POWER

●

For base unit

●

For base unit

STOP ALARM

button

STOP ALARM

button

and do not appear in the call
sub-base unit with monitor.

Note

(Beeps) The air is

contaminated. Open a window

and ventilate the room.

(Beeps)

does not appear in the call
sub-base unit with monitor.

Note

Summary of Contents for Windea VGD13113W























































































































Search results

Summary of Contents for Windea VGD13113W

Reviews:

Related manuals for Windea VGD13113W

Brands by name

Popular brands

Panasonic Windea VGD13113W, Simple Manual

Search results

Summary of Contents for Windea VGD13113W

Reviews:

Related manuals for Windea VGD13113W

Brands by name

Popular brands