Panasonic Windea VGD13113W, Simple Manual

Page: 26 / 118

復旧/警報音停止
RESET/ STOP ALARM
OPEN
電源
火災
POWER
FIRE 留守 警戒 戸締り NOTHOME ガス GAS SET
ALARM LOBBY
警報 ロビー
ALARM LOBBY
警報 ロビー
VOLUME
EXTENSION
UNLOCK
TALK
呼出音量
室内呼
解錠
通話
EMERG.
非常
VGD13113W VGD13113W
MANAGER
管理
MANAGER
管理
TALK button
Press
Press
●
For base unit
46 47
1
Call tone "beep" sounds
For Base Unit/Call Sub-base Unit with Monitor
For Call Sub-base Unit
TALK button
2
Press the TALK button to talk
3
Press the TALK button to end
●
The conversation will end automatically in
approximately 1 minute from the start of the call.
●
The extension callends.
The conversation time cannot be extended.
1
Call tone "beep" sounds
2
Press the TALK button to talk
3
Press the TALK button to end
●
The conversation will end automatically in
approximately 1 minute from the start of the call.
●
The extension call ends.
The conversation time cannot be extended.
Receiving a Call
Extension Call
(Call with base unit/ sub-base unit)
●
After calling, you will be able to talk for
approximately 10 seconds even without
pressing the TALK button. (The TALK button
lights up in red.)
●
After about 10 seconds, the status changes to
the waiting state of answering (the call is ended
once) and the TALK button flashes in red.
●
If approximately 30 seconds pass without
any answer after the call tone sounds, the
TALK button will turn off automatically.
●
After calling, you will be able to talk for
approximately 10 seconds even without
pressing the TALK button. (The TALK button
lights up in green.)
●
After approximately 10 seconds, the status
changes to the waiting state of answering
(the call is ended once) and the TALK
button flashes in green.
●
If approximately 30 seconds pass without
any answer after the call tone sounds, the
TALK button will turn off automatically.
Note
Note
Note
Note
Note
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
Open the Calling screen
( Page 41)
●
In the case of a base unit called by
sub-base unit (Room 1) calling all units.
3
4
5
Calling another Unit
●
After Step , the Other Unit screen will appear.
Touch the block you want to call first before
proceeding to the operation in Step .
●
The Number Of The Unit screen
appears.
If you enter the wrong room number, touch
first before entering the number again.
For a condominium that supports the unit call function (calling another unit from a unit), it is
enabled to call another unit.
Talk once the called unit answers
Depending on the equipment and operating
configuration of the condominium you are
living in, the call destination description differs.
●
The conversation with other unit ends.
Press the TALK button to end
●
The maximum digit to enter for the room
number is up to 4.
Enter the room number of the unit
you want to call and touch
●
The conversation will end automatically in
approximately 1 minute from the start of the call.
●
The conversation time can be extended.
( Page 33)
When Calling a Unit of Another Block
Touch
2
The display details of the block number vary depending
on the operating configuration of the condominium
HA system.
2
Touch
3
2
1
● Other units cannot be called when "Reject Calls" is set for other unit setting in the user
setting in "Ringtones" under "Sound Setting". ( Page 100)
●
The call sub-base unit is not compatible with calling another unit.
Touch
the numeric
buttons
1
(For base unit)
Note
Touch
Press
通話
TALK
Touch
any one