Panasonic Windea VGD13113W, Simple Manual

Page: 41 / 118

76 77
The screen appears as animation of illustration of penguin, and indicates the degree of energy
saving achievement by the penguin.
Energy Saving Monitor (Penguin) Screen
●
The display in the screen illustration is for explanation, and it will be different from actual display.
● The value appears as "--.- kW" when data cannot be received from the D series meter box.
Note
Viewing the Energy Saving Monitor Screen
(For base unit)
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
●
Switches to the bubble display screen.
( Page 74)
● Returns to the previous screen.
●
Displays the rate time zone of the electricity. ( Page 80)
●
The button display will change in accordance with the time zone for rate when the electricity
rate setting ( pages 127 to 133) is late night-time electricity power or all electrification.
● Performs the detailed setting to use more conveniently. ( Page 126)
●
Indicated the currently used electricity.
●
Displays the past usage of energy. ( Pages 78 to 79)
● The "Bulb icon" turns on when the momentary value has exceeded the electricity check setting
( pages 144 to 145) value, allowing to check if there is any electrical appliance left on before
leaving the unit.
●
Degree of energy saving
achievement for "today" is
indicated by the meter.
●
The needle will move to
right as the electricity,
water, and gas are used,
and the color of meter will
change to yellow when it
exceeds 80% of the target
value, and to red when it
exceeds the target value.
Over 80 to 90% Over 90 to 100% Over 100 to 110% Over 110 to 120% Over 120%
Over 10 to 20% 0 to 10% Over 20 to 30%
Over 40 to 50% Over 50 to 60% Over 70 to 80% Over 60 to 70%
Over 30 to 40%
■
Degree of energy saving
achievement for today
Don’t give up! You’re almost there! Keep it up! Good!
Very good! (Degree of achievement
≦
85%)
(115% < degree of
achievement)
(105% < degree of
achievement
≦
115%)
(95% < degree of
achievement
≦
105%)
(85% < degree of
achievement
≦
95%)
●
The energy saving target value setting is set per month in "Power Consumption Target Value Setting"
( pages 138 to 139). The degree of achievement for "Yesterday" or "Today" is determined by the
per-rate basis of the target value set per month.
●
The degree of achievement of energy saving indicates the degree of achievement of actual against
the set target value.
●
Past maximum daily electricity consumption or CO
2
emission of this month can be checked.
( Pages 81 to 82)
■
Degree of energy saving achievement for this month
●
Degree of energy saving achievement for "This Month" is indicated by the size of the ice and the number
of penguins on it.
Electricity check setting
value has exceeded
Night Morning and
evening
All electrification
only
Day
■
Degree of energy saving achievement for yesterday
●
Degree of energy saving achievement for "Yesterday" is indicated
by the penguins at far left.
●
When the target
is achieved
●
When the target
is not achieved
●
The illustration below is displayed when
energy consumption of yesterday was 0.
●
The size of the ice and the number of penguins on ice
increases or decreases depending on the degree of
achievement. Perform the energy saving so that there
are 5 penguins on the ice.
●
This is displayed when the Energy
Saving Monitor screen is selected
in the selection screen
( Page 73).
● "Selection >" is displayed when
selected from the Eco Screen
Selection screen ( Page 73).
●
"Information > Selection >" is
displayed when selected from
the selection screen and the Eco
Screen Selection screen.