Continued on next page
106
107
Press the OFF button when setting is completed
3
●
It will return to the waiting state (nothing is displayed on the
screen).
Press the OFF button when setting
is completed
3
●
It will return to the waiting state (nothing
is displayed on the screen).
Talk in Yuttari Talk by pressing
to switch while talking.
It is possible to talk in Yuttari Talk
without pressing while talking.
2
1
●
The Yuttari On/Off screen appears.
●
For how to start the setting, see page 97.
Yuttari On/Off
Touch
2
Touch
any one
1
The setting cannot be changed while talking or talking in Yuttari Talk.
Set this when you are not talking.
Touch in the Setting screen
Touch
Off
(Initial setting)
On
2
1
●
The Auto Record Notice screen appears.
●
For how to start the setting, see page 97.
Auto Record Notice
Touch
2
Touch
any one
1
On
(Initial setting)
Off
Touch in the Setting screen
●
This setting is available to only the base unit with video recording function.
●
"Auto Record Notice" does not appear when set to "Notification of new arrivals announcement: Off" by the
installation setting. (Consult with the management company or the company that installed the system.)
Touch
Select either of "On/Off", and touch
Select either of "On/Off", and
touch
Setting According to Your Preferences
The area around the MENU button will flash in blue to notify that
there have been a call from the main entrance, unit entrance
(door phone with camera), or building manager room (with video
capability) that has not been answered while the Not-home
setting was set to "Off", and a video was automatically recorded.
The area around the MENU button will not flash in blue to notify
that there have been a call from the main entrance, unit entrance
(door phone with camera), or building manager room (with video
capability) that has not been answered while the Not-home
setting was set to "Off", and a video was automatically recorded.
Yuttari
ON
Yuttari
OFF
Note
Note
INTRODUCTION
USUAL USAGE
SETTING ACCORDING TO
YOUR PREFERENCES
OPERATIONS AND MEASURES
WHEN ALARM GOES OFF
SECURITY ALARM SETTING
AND DISARMING
RECORD
MANAGEMENT
OTHER
Note
Note
Touch
any one
1
1
2
3
On (Only when
an alarm sounds.)
Entry of security number is
required to cancel only
security alarm.
Entry of security number is
required to cancel security
vigilance and security alarm.
On
Off
(Initial setting)
Entry of security number is
not required to cancel security
vigilance and security alarm.
●
Each setting screen appears.
Select one of "On/On (Only when
an alarm sounds.)/Off", and touch
Security Setting
Security Number screen
Security Number
●
The Security Setting screen appears.
●
For how to start the setting, see page 97.
●
Also see "Security Alarm" ( Pages 186
to 189).
Touch to go to 2/2
Touch to go to 1/2
●
Security number is a 4 digit number made by combination of 10 numbers from "0" to "9".
●
Make sure to note the set security number in the "Security number write-in column" in page 95 so it can
be referenced when forgotten.
Touch in the Setting screen
Touch for the content to set
Touch
Touch
2
●
This setting is available when the security function is installed.
●
This cannot be set during security vigilance. Operate after cancelling the security vigilance
( Pages 195 to 199).
Touch
any one
Touch
any one
Press
OFF
終了
Press
OFF
終了
