Chapter 3
Basic Operations — Switching on/off the projector
ENGLISH - 65
f
The user name and password of the administrator account can also be changed in “[Set up password] page (when accessed by
administrator account)” (
x
page 210) of the web control screen.
f
The user name and password of the standard user account without administrator rights can be set in “[Set up password] page (when
accessed by administrator account)” (
x
page 210) of the web control screen.
Making adjustments and selections
Perform the image adjustment when the projected image has stabilized.
When the [PROJECTOR SETUP] menu
→
[LENS]
→
[ACTIVE FOCUS OPTIMIZER]
→
[ACTIVE FOCUS] is
set to [OFF], it is recommended to perform the focus adjustment after 30 minutes or more have elapsed with the
focus test pattern displayed. For details of the test pattern, refer to “[TEST PATTERN] menu” (
x
page 155).
To use the active focus optimizer function, set the [PROJECTOR SETUP] menu
→
[LENS]
→
[ACTIVE FOCUS
OPTIMIZER]
→
[ACTIVE FOCUS] to [ON], and then adjust the focus.
For details of [ACTIVE FOCUS OPTIMIZER], refer to the [PROJECTOR SETUP] menu
→
[LENS]
→
[ACTIVE
FOCUS OPTIMIZER] (
x
page 129).
1) 8)
6)
7) 9)
2) 3)
2) 3)
4)
5)
1) 6) 7) 8) 9)
4)
1)
Press the <FOCUS> button to roughly adjust the focus of the projected image. (
x
page 68)
2)
Change the setting of the [PROJECTOR SETUP] menu
→
[PROJECTION METHOD] depending on the
installation mode. (
x
page 36)
f
Refer to “Navigating through the menu” (
x
page 79) for the operation of the menu screen.
3)
Execute the lens calibration.
f
Execute the lens calibration when using the projector for the first time after attaching the projection lens.
(
x
page 70)
4)
Select the input by pressing the input selection button on the remote control or the control panel.
f
The buttons that can be used on the remote control or the control panel are as follows.
Remote control:
<HDMI 1> button, <HDMI 2> button, <DIGITAL LINK> button, <SDI> button, <INPUT MENU> button
Control panel:
<INPUT SELECT> button
f
For details of operation for input selection, refer to “Selecting the input signal” (
x
page 67).
5)
Adjust the front, back and sideway tilt of the projector with the adjustable feet. (
x
page 44)
6)
Press the <SHIFT> button to adjust the position of the projected image.
7) Press the <ZOOM> button to adjust the image size to match the screen.
8)
Press the <FOCUS> button again to adjust the focus.
9)
Press the <ZOOM> button again to adjust the zoom to match the projected image size to the screen.
Note
f
When the projector is switched on for the first time after purchase, or when the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[FACTORY
RESET] is executed, the focus adjustment screen is displayed after the projection starts, followed by the
[INITIAL SETTING]
screen and
the
[ADMINISTRATOR ACCOUNT]
screen. If the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[NETWORK/E-MAIL ONLY] is executed,
the
[ADMINISTRATOR ACCOUNT]
screen is displayed after the projection starts. For details, refer to “When the initial setting screen is
displayed” (
x
page 57) and “When the administrator account setting screen is displayed” (
x
page 63).