Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 153
[POWER ON/OFF]
Enables power-on link control and power-off link control.
Power-on link control and power-off link control work only if it is supported by the connected CEC-compatible
device.
While the projector is in standby, if the CEC-compatible device connected to the <HDMI IN 1> terminal or
<HDMI IN 2> terminal is turned on or starts playing, the projector turns on, starts projection, and switches
to the input that the linked CEC-compatible device is connected. While the projector is turned on, if the
CEC-compatible device starts playing, the projector switches to the input that the CEC-compatible device is
connected.
When the CEC-compatible device connected to the <HDMI IN 1> terminal or <HDMI IN 2> terminal is turned
off, the projector enters standby mode.
Note
f
If the CEC-compatible device does not support CEC 1.4, it may not support the link control described in the manual.
f
Depending on the connected CEC-compatible device, the link control may not operate normally.
[INITIALIZE]
Return the various user data settings to the factory default settings.
1) Press
as
to select [INITIALIZE].
2) Press the <ENTER> button.
f
The
[SECURITY PASSWORD]
screen is displayed.
3) Enter a security password and press the <ENTER> button.
f
The
[INITIALIZE]
screen is displayed.
4) Press
as
to select an item to initialize.
[USER SETTINGS]
The user data to return to factory default settings can be selected arbitrarily.
The projector goes into the standby status after executing [INITIALIZE].
For details of operation, refer to “Initializing the settings by selecting the items” (
x
page 153).
[REGISTERED SIGNAL ONLY]
Deletes all the signals registered in [SIGNAL LIST]. All the setting values saved for each registered
signal are also deleted.
[NETWORK/E-MAIL ONLY]
Returns all the setting items under the [NETWORK] menu and all the setting items in the [Detailed set
up] page of the web control screen to the factory default settings.
f
The items of [Time Zone], [Date], and [Time] in the [Adjust clock] page of the web control screen do
not return to the factory default settings.
f
The information such as the self-signed certificate already created in the [Certificate] page of the
web control screen or the server certificate already installed is not deleted.
[LOGO IMAGE ONLY]
Deletes the image registered in [USER LOGO].
[UNIFORMITY ONLY]
Sets the setting of the [DISPLAY OPTION] menu
→
[UNIFORMITY] to the factory default setting.
[FACTORY RESET]
Returns all the user data settings to the factory default settings. The projector goes into the standby
status after executing [FACTORY RESET].
f
Proceed to Step
5)
when anything other than [USER SETTINGS] is selected.
5) Press the <ENTER> button.
f
The confirmation screen is displayed.
6) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
The security password is the password set in the [SECURITY] menu
→
[SECURITY PASSWORD CHANGE].
Initial password of the factory default setting:
awsqawsq
f
To delete only a part of a registered signal, delete it following “Deleting the registered signal” (
x
page 158).
f
To return the setting of [Time Zone] in the [Adjust clock] page of the web control screen and the setting of the [PROJECTOR SETUP] menu
→
[DATE AND TIME]
→
[TIME ZONE] to the factory default settings, initialize them with one of the following methods.
g
Initializing by selecting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[FACTORY RESET]
g
Initializing by setting the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[USER SETTINGS]
→
[OTHER USER SETTING] to
[INITIALIZE]
f
The self-signed certificate already created in the [Certificate] page of the web control screen or the information of the server certificate
already installed can be deleted in the web control screen.
f
If initialized by selecting [FACTORY RESET], the
[INITIAL SETTING]
screen is displayed when the projection is started the next time.
Initializing the settings by selecting the items
1) Press
as
to select [INITIALIZE].
