Chapter 5
Operations — Using the information monitor function
218 - ENGLISH
Operation
Adjustment
Range of adjustment
Press
w
.
The information monitor becomes bright.
30 % - 100 %
(Factory default setting: 100 %)
Press
q
.
The information monitor becomes dark.
Note
f
[BRIGHTNESS] is adjusted in increments of 10.
f
This setting item is common with the following menu item in the on-screen menu.
g
The [PROJECTOR SETUP] menu
→
[INFO MONITOR SETTING]
→
[BRIGHTNESS]
[NETWORK]
Configure the settings to use the network function.
r
Setting the wired LAN IP version
1) Press
as
to select [SETUP].
2) Press the <ENTER> button.
f
The sub-menu item is displayed.
3) Press
as
to select [NETWORK].
4) Press the <ENTER> button.
f
The network selection item is displayed.
5) Press
as
to select [WIRED LAN].
6) Press the <ENTER> button.
f
The IP setting item is displayed.
7) Press
as
to select [IP VERSION].
8) Press the <ENTER> button.
f
The current setting is displayed.
9) Press the <ENTER> button.
f
Setting can be changed.
10) Press
qw
to switch the setting.
f
The items will switch each time you press the button.
[IPv4]
Uses only the “IPv4” protocol.
[IPv6]
Uses only the “IPv6” protocol.
[IPv4 & IPv6]
Both the “IPv4” and the “IPv6” protocols can be used.
Note
f
This setting item is common with the following menu item in the on-screen menu.
g
The [NETWORK] menu
→
[WIRED LAN]
→
[IP VERSION]
r
Setting the acquisition method of the wired LAN IPv4 address
1) Press
as
to select [SETUP].
2) Press the <ENTER> button.
f
The sub-menu item is displayed.
3) Press
as
to select [NETWORK].
4) Press the <ENTER> button.
f
The network selection item is displayed.
5) Press
as
to select [WIRED LAN].
6) Press the <ENTER> button.
f
The IP setting item is displayed.
