Chapter 4
Settings — [PROJECTOR SETUP] menu
148 - ENGLISH
Sending status content via E-mail
The status content can be sent to the E-mail address (up to two addresses) set in “[E-mail set up] page”
(
x
page 207).
1) Press the <ENTER> button while the 1/5 to 4/5 page of the [STATUS] screen is displayed.
f
The selection screen is displayed.
2) Press
as
to select [SEND E-MAIL].
3) Press the <ENTER> button.
f
The
[SELECT E-MAIL ADDRESS]
screen is displayed.
4) Press
as
to select the destination.
5) Press the <ENTER> button.
f
The confirmation screen is displayed.
6) Press
qw
to select [OK], and press the <ENTER> button.
f
The status content is sent.
Saving status content in USB memory
The status content can be saved in a USB memory attached to the <USB> terminal.
1) Press the <ENTER> button while the 1/5 to 4/5 page of the [STATUS] screen is displayed.
f
The selection screen is displayed.
2) Press
as
to select [SAVE TO USB MEMORY].
3) Press the <ENTER> button.
f
The confirmation screen is displayed.
4) Press
qw
to select [OK], and press the <ENTER> button.
f
The status content is saved.
Note
f
For the USB memory that can be used with the projector and handling of the memory, refer to “Using the USB memory” (
x
page 73).
[INFO MONITOR SETTING]
Set the information monitor of the control panel.
For operation of the information monitor, refer to “Using the information monitor function” (
x
page 213).
Setting the display during normal status
Display/hide the information monitor during no operation.
1) Press
as
to select [INFO MONITOR SETTING].
2) Press the <ENTER> button.
f
The
[INFO MONITOR SETTING]
screen is displayed.
3) Press
as
to select [DEFAULT].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Does not display the information.
[USER VIEW]
Displays the items set in the [PROJECTOR SETUP] menu
→
[INFO MONITOR SETTING]
→
[USER
VIEW].
Note
f
Even if [DEFAULT] is set to [OFF], the content of an error or a warning is automatically displayed when it occurs.
f
This can also be set with operation in the information monitor. For details, refer to “Using the information monitor function” (
x
page 213).
