Chapter 5
Operations — Using the information monitor function
ENGLISH - 221
10) Press the <ENTER> button.
f
Setting can be changed.
11) Press
qw
to switch the setting.
f
The items will switch each time you press the button.
[ON]
Select this item when the temporary IPv6 address is used.
[OFF]
Select this item when the temporary IPv6 address is not used.
Note
f
This setting item is common with the following menu item in the on-screen menu.
g
The [NETWORK] menu
→
[WIRED LAN]
→
[IPv6 SETTINGS]
→
[TEMPORARY ADDRESS]
r
Connecting via wireless LAN
Set the wireless LAN function.
f
To use the wireless LAN function with the projector, it is necessary to attach the optional Wireless Module
(Model No.: AJ-WM50 Series) to the <USB> terminal.
1) Press
as
to select [SETUP].
2) Press the <ENTER> button.
f
The sub-menu item is displayed.
3) Press
as
to select [NETWORK].
4) Press the <ENTER> button.
f
The network selection item is displayed.
5) Press
as
to select [WIRELESS LAN].
6) Press the <ENTER> button.
f
The current setting is displayed.
7) Press the <ENTER> button again.
f
Setting can be changed.
8) Press
qw
to switch to [ENABLE].
f
The items will switch each time you press the button.
[DISABLE]
Select this item when the wireless LAN is not to be used.
[ENABLE]
Select this item when the wireless LAN is to be used.
Note
f
[WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50 Series) is not installed in the <USB> terminal.
f
This setting item is common with the following menu item in the on-screen menu.
g
The [NETWORK] menu
→
[WIRELESS LAN]
[STATUS] menu
Display the status of the projector.
1) Press
as
to select [STATUS].
2) Press the <ENTER> button.
f
The sub-menu item is displayed.
3) Press
as
to select an item.
Sub-menu item
Overview
[PROJECTOR]
Displays the information of the projector.
[INFO MONITOR]
Displays the setting information of the information monitor.
[NETWORK]
Displays the setting information of network.
[VERSION]
Displays the firmware version of the projector.
