Chapter 5
Operations — Web control function
192 - ENGLISH
Registering the user test pattern
1)
Click [Projector control] → [Detail control] → [TEST PATTERN].
f
The test pattern selection buttons are displayed at the right side of the control page and [USER TEST
PATTERN LIST] is displayed on the bottom right.
2) Click the [ADD] button of the user test pattern number to be registered.
f
Up to three user test patterns can be registered.
f
Number that user test pattern is not registered is displayed as [No such file.], and the [ADD] button is
displayed.
f
Number that user test pattern is already registered is displayed as the user test pattern name, and the
[EDIT] button is displayed.
f
Click the [ADD] button of the register destination to display the file selection screen.
3) Select the file of a test pattern to register, and click [Open].
f
The user test pattern name is displayed, and the registration is completed.
Note
f
To register a new test pattern to the number with the user test pattern already registered, delete the registered test pattern first, and then
perform the registration again. Registration by overwriting is not possible. For the procedure to delete, refer to “Deleting the registered user
test pattern” (
x
page 192).
Deleting the registered user test pattern
1)
Click [Projector control] → [Detail control] → [TEST PATTERN].
f
The test pattern selection buttons are displayed at the right side of the control page and [USER TEST
PATTERN LIST] is displayed on the bottom right.
f
Number that user test pattern is registered is displayed as the user test pattern name, and the [EDIT] button
is displayed.
2) Click the [EDIT] button of the user test pattern number to be deleted.
f
The edit screen is displayed at the lower part of the [USER TEST PATTERN LIST].
3) Click the [DELETE] button in the edit screen.
f
The confirmation screen is displayed.
4) Click [OK].
f
Deleting of the user test pattern is completed.
