background image

 

ENGLISH - 17

 

r

Trademarks

 

f

SOLID SHINE is a trademark of Panasonic Holdings Corporation.

 

f

Windows and Microsoft Edge are registered trademarks or trademarks of Microsoft Corporation in the United 

States and other countries.

 

f

Mac, macOS, Safari, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries and 

regions.

 

f

Trademark PJLink is a trademark applied for trademark rights in Japan, the United States of America and other 

countries and areas.

 

f

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or 

registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

 

f

Crestron Connected, the Crestron Connected logo, Crestron Fusion, and XiO Cloud are either trademarks or 

registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.

 

f

HDBaseT

TM

 is a trademark of HDBaseT Alliance.

 

f

Art-Net

TM

 Designed by and Copyright Artistic Licence Holdings Ltd

 

f

IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

 

f

Android and Google Chrome are trademarks of Google LLC.

 

f

QR Code is a registered trademark of DENSO WAVE INCORPORATED in Japan and in other countries.

 

f

Adobe, Acrobat, and Reader are either registered trademarks or trademarks of Adobe in the United States and/

or other countries.

 

f

Some of the fonts used in the on-screen menu are Ricoh bitmap fonts, which are manufactured and sold by 

Ricoh Company, Ltd.

 

f

All other names, company names, and product names mentioned in this manual are trademarks or registered 

trademarks of their respective owners.

Please note that the 

®

 and 

TM

 symbols are not specified in this manual.

Software information regarding this product

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Connect Co., Ltd.,

(2) the software owned by third party and licensed to Panasonic Connect Co., Ltd.,

(3) the software licensed under the GNU General Public License, Version 2.0 (GPL V2.0),

(4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL V2.1), and/or

(5) open source software other than the software licensed under the GPL V2.0 and/or LGPL V2.1.

The software categorized as (3) - (5) are distributed in the hope that it will be useful, but WITHOUT ANY 

WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR 

PURPOSE. 

For details, refer to the license terms and conditions of each open source software.

The open source software license is stored in the firmware of this product, and can be downloaded by accessing 

this projector using the web browser. For details, please refer to “Web control function” (

x

 page 183).

At least three (3) years from delivery of this product, Panasonic Connect Co., Ltd. will give to any third party who 

contacts us at the contact information provided below, for a charge no more than our cost of physically performing 

source code distribution, a complete machine-readable copy of the corresponding source code covered under 

GPL V2.0, LGPL V2.1 or the other licenses with the obligation to do so, as well as the respective copyright notice 

thereof.

Contact Information: 

[email protected]

 

r

Illustrations in this manual

 

f

Illustrations of the projector, menu screen (OSD), and other parts may vary from the actual product.

 

f

Illustrations displayed on the computer screen may differ depending on the types of the computer, operating 

system, and the web browser.

 

f

Illustrations of the projector with the power cord attached are only examples. The shape of the supplied power 

cords varies depending on the country where you purchased the product.

 

r

Reference pages

 

f

Reference pages in this manual are indicated as (

x

 page 00).

 

r

Term

 

f

In this manual, the “Wireless/wired remote control unit” accessory is referred to as “Remote control”.

Summary of Contents for PT-MZ17K

























































































































































































































































































Reviews: