Panasonic KX-MB2100 series Operating Instructions Manual Download Page 17

Page: 17 / 140

2.1 Drum cartridge

The supplied drum cartridge includes starter toner (toner
cartridge is not supplied).

When using the unit for the first time, please use the
supplied drum cartridge.

Caution:

Read the instructions before you begin
installation.

Open the front cover by holding the indentation (

If the unit is in sleep mode, press a key to put the
unit in standby mode for the next process when
replacing the toner cartridge and/or drum
cartridge.

Remove the drum cartridge (

), which is

pre-installed in the unit.

Remove the protective sheet (

) from the drum

cartridge.

Do not touch or scratch the drum surface.

“

PAPER JAMMED

”

is displayed before the

protective sheet is removed.

2. . Installation and Preparation

2. Installation and Preparation

Summary of Contents for KX-MB2100 series













































































































































Search results

Summary of Contents for KX-MB2100 series

Reviews:

Related manuals for KX-MB2100 series

Brands by name

Popular brands

Panasonic KX-MB2100 series, Operating Instructions Manual

Search results

Summary of Contents for KX-MB2100 series

Reviews:

Related manuals for KX-MB2100 series

Brands by name

Popular brands