Panasonic DP-C266 Operating Instructions Manual Download Page 112

Page: 112 / 230

Chapter 5

Internet Fax

112

Select “

More Menus

” if additional settings

are required.

Deferred Transmission

(see page 57)

Emailing an A3-Sized Document

(see

page 127)

Relayed Transmission from Internet Fax

(see page 154)

Select “

Email

”.

Enter an Email address by selecting
“

Keyboard

”, or select a pre-

programmed Email address.

Refer to

Entering an Email Address

(see

page 113)

The Address Book is available only when
destinations are registered (See page 176).

Refer to

Using Cc, Bcc and From

(see

page 120)

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then the Email transmission
starts.

The scanned data is sent in black and white (Grey
Scale).

If the transmission fails, an error mail is delivered
from the mail server and printed on this machine.
The error mail including an error message and an
image of the first page of the transmitted document
is received.
Refer to

When Email Transmission Fails

(see

page 131).

For instructions on how to cancel a transmission,
refer to

Cancelling a Communication

(see page

53).

When sending from the Platen Glass, place the
next original, and follow the instructions described
on the Touch Panel Display.

Press the

Reset

key to return the machine to the

initial screen of the current active mode.

To print the transaction journal, refer to

Transaction Journal

(See page 196).

Summary of Contents for DP-C266







































































































































































































































Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands

Panasonic DP-C266, Operating Instructions Manual

Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands