Panasonic DP-C266 Operating Instructions Manual Download Page 143

Page: 143 / 230

Chapter 5

Internet Fax

143

Enter a Key Name, and then select
“

”.

Key Names are used to select the
destinations on the Touch Panel Display.

For instructions on using the onscreen
Keyboard, refer to

Using the Keyboard

the Operating Instructions (For Function
Parameters) of provided CD-ROM.

Select “

IFax

”, and then select “

”.

To display the Email address in the Address
Book of both Email/Scan and Fax modes,
select “

”.

Select whether to add the Email
address to “

Favourites

”.

To enable sub-addressed routing,
enter a sub-address, and then select
“

”.

This screen appears when the Function
Parameter “

152 Sub-Addr Routing

” (Fax/

Email Settings > Fax Parameters) has been
set to “

Valid

”.

To enable routing by a numeric ID,
enter a numeric ID, and then select
“

”.

The Email address is added to the Address
Book.

This screen appears when the Function
Parameter “

153 TSI Routing

” (Fax/Email

Settings > Fax Parameters) has been set to
“Valid”.

Press the

Reset

key to return the machine

to the initial screen of the current active
mode.

Select to display the station in
“

Favourites

”.

Select not to display the
station in “

Favourites

”.

Summary of Contents for DP-C266







































































































































































































































Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands

Panasonic DP-C266, Operating Instructions Manual

Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands