Panasonic DP-C266 Operating Instructions Manual Download Page 115

Page: 115 / 230

Chapter 5

Internet Fax

115

Using the Address Book

Use a Key Name

If an Email address is pre-programmed in the
Address Book, it can be selected by using a Key
Name.

To use the Address Book, it is necessary to have
Email addresses added to the Address Book in
Function Parameters. Refer to

Adding an Email

Address to Address Book

(see page 179).

Follow the step 1 and 2 on page 111.

Select a Key Name tab.

Select the Email address you want to
send to.

Select the same destination to cancel a
choice.

To enter additional Email addresses, repeat
steps 2 and 3.

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then the Email transmission
starts.

Select from “Favourites”

If an Email address is pre-programmed in the
“

Favourites

”, it can be selected from

“

Favourites

”.

To use the Address Book, it is necessary to have
Email addresses added to the Address Book in
Function Parameters. Refer to

Adding an Email

Address to Address Book

(see page 179).

If there are any Email addresses added in the
“

Favourites

”, the Address Book opens the

“

Favourites

” tab first.

Follow the step 1 and 2 on page 111.

Select “

Favourites

”.

Select the Email address you want to
send to.

Select the same destination to cancel a
choice.

To add more Email addresses, select other
addresses.

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then the Email transmission
starts.

Summary of Contents for DP-C266







































































































































































































































Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands

Panasonic DP-C266, Operating Instructions Manual

Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands