Panasonic DP-C266 Operating Instructions Manual Download Page 22

Page: 22 / 230

Chapter 2 Basi

c Fax Transmission

Using the Address Book

Use a Key Name

If a destination is registered in the Address
Book, it can be selected by using a Key Name.

The fax numbers must be pre-programmed into
the Address Book. Refer to

Adding a Fax Number

into the Address Book

(see page 176).

Follow the step 1 and 2 on page 18.

Select the Key Name tab.

Select the desired destination.

To cancel a choice, select the same
destination again.

To enter additional destinations, repeat
steps 2 and 3.

To confirm the destinations, select
“

Destinations: ###

” on the upper left corner

of the screen.

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then starts dialling the telephone
number.

Select from “Favourites”

If a destination is registered as a Favourite in
the Address Book, it can be selected using the
“

Favourites

” tab.

The fax numbers must be pre-programmed into
the Address Book. Refer to

Adding an Email

Address to Address Book

(see page 179).

Follow the step 1 and 2 on page 18.

Select “

Favourites

” to display the

Favourites screen.

Select the desired destination.

To cancel a choice, select the same
destination again.

For transmission to additional destinations,
press the relevant keys.

To confirm the destinations, select
“

Destinations: ###

” on the upper left corner

of the screen.

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then starts dialling the telephone
number.

Summary of Contents for DP-C266







































































































































































































































Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands

Panasonic DP-C266, Operating Instructions Manual

Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands