Panasonic DP-C266 Operating Instructions Manual Download Page 123

Page: 123 / 230

Chapter 5

Internet Fax

123

Setting Subject

Every time you send an Email, you can enter its subject manually. To enter a subject, follow the steps
below.

The default subject is preset if the Function Parameter “

21 Default Subject

” (Fax/Email Settings > User

Parameters) has been set. For programming instructions, refer to

Fax/Email Settings

in the Operating

Instructions (For Function Parameters) of provided CD-ROM.

On the Email screen, select “

Subject

”.

(See pages 111 and 120)

Enter a subject, and then select “

”.

The subject field is up to 40 characters in
length.

For instructions on using the onscreen
Keyboard, refer to

Using the keyboard

the Operating Instructions (For Function
Parameters) of provided CD-ROM.

If you make a mistake, select “

Back Space

”

to delete one character at a time, or move
the cursor to the beginning of the field, and
then press the

Clear

key to delete the entire

entry.

Press the

Start

key.

The original(s) are stored into memory with a
file number. Then the Email transmission
starts.

Summary of Contents for DP-C266







































































































































































































































Search results

Summary of Contents for DP-C266

Reviews:

Brands by name

Popular brands

Panasonic DP-C266, Operating Instructions Manual

Search results

Summary of Contents for DP-C266

Reviews:

Brands by name

Popular brands