Panasonic DP-C266 Operating Instructions Manual Download Page 34

Page: 34 / 230

Chapter 2 Basi

c Fax Transmission

Place original(s).

Refer to

Placing Originals

(see page 14).

Press the

Fax

key.

Select “

Basic Menu

”.

Select “

Quality Adj.

”.

Adjust the original quality, and then
select “

”.

Original Type

If a photo original is scanned in the “

Text

”

mode, the scanned image can be
indistinguishable in the halftone area.

When “

Text/Photo

” or “

Photo

” is selected,

you cannot select the “

Std

” Resolution

setting.

Density

Resolution

The finer an original to be scanned, the
more information needs to be transmitted,
thus, requiring a longer communication time.

If “

S-Fine

” or “

600dpi

” is selected, and the

receiving station does not support these
resolutions, originals will be transmitted with
resolution of the receiver’s capability.

Select for text-only originals.

Select for originals in which text
and photos are mixed.

Select for photo-only originals.

Each time it is selected, the
density level is decreased,
brightening the printed colour.

Each time it is selected, the
density level is increased,
darkening the printed colour.

Select for ordinary originals.

Select for originals containing
small characters or graphics.

Select for fine originals
containing detailed drawings or
text.

Summary of Contents for DP-C266







































































































































































































































Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands

Panasonic DP-C266, Operating Instructions Manual

Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands