manualshive.com logo in svg

Panasonic DP-C266, Operating Instructions Manual

Share
Download
Panasonic DP-C266 Operating Instructions Manual Download Page 217

217

Chapter 9   Solving Problems

410

Communication cancelled by 
the transmitting side.

Check with the other party.

411

Polling password does not 
match.

Check the polling password.

Operating 
Instructions (For 
Function 
Parameters)

412

No data from the transmitting 
side

Check with the other party.

414

Polling password does not 
match.

Check the polling password.

Operating 
Instructions (For 
Function 
Parameters)

415

Polling transmission error

Check the polling password.

Operating 
Instructions (For 
Function 
Parameters)

416/417

Received data has too many 
errors.

Check with the other party.

420/421

Machine goes to the receiving 
mode, but receives no 
command from the 
transmitting side.

Remote side misdial.
Check with the other party.

422/427

Interface is incompatible.

Check with the other party.

430/434

Communication error occurred 
while receiving.

Check with the other party.

436/490

Received data has too many 
errors.

Check with the other party.

438

Received data from the 
sender whose numeric ID has 
been registered as a junk fax 
number.

456

Unit received a confidential 
document or was requested to 
be polled of a confidential 
document under any of 
following conditions.
1.Not enough space in 

memory to receive the 
confidential document.

2.Confidential Mailbox is full.
3.While printing received 

document.

Unit was requested to relay a 
document.

Print a confidential document.
Wait until the unit finishes printing.

Printing a 
Received 
Confidential 
Document

 (see 

page 70)

459

Communication error 
occurred.

Check with the other party.

494

Communication error occurred 
while receiving.

Check with the other party.

495

Telephone line disconnected.

Check with the other party.

501/502/503/

504

Communication error occurred 
using the internal V.34 
modem.

Check with the other party.

Info. Code

Problem

Action

Refer to

Summary of Contents for DP-C266







































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands