Panasonic DP-C266 Operating Instructions Manual Download Page 215

Page: 215 / 230

215

Chapter 9 Solving Problems

Communicating

No dial tone heard

• Check the telephone line connection.
• Check the telephone line.

Checking the
Telephone Line

(see page 222)

The machine does not receive
automatically.

• Check the telephone line connection.
• Check the receive mode settings.
• If the Function Parameter “

13 Auto Print JRNL

”

(Fax/Email Settings > Fax Parameters) is set to
“

Valid

”, and the machine is printing the received

document(s) from memory, which also happens
to be the 200th transaction, the machine will not
answer automatically until the Transaction
Journal completes printing.

Operating
Instructions (For
Function
Parameters)

Cannot send or receive.

An error code appears on the display. See the
error code table and identify the problem.

Information
Codes

(see page

216)

Operation

Operation rejected

Turn OFF the machine momentarily, and then turn
it ON again.

Problem

Symptom

Action

Refer to

Summary of Contents for DP-C266







































































































































































































































Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands

Panasonic DP-C266, Operating Instructions Manual

Search results

Summary of Contents for DP-C266

Reviews:

Related manuals for DP-C266

Brands by name

Popular brands