204
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
Appendix
205
Aquarea air-to-water heat pumps - Planning and installation manual - 01/2018
Appendix
Initial settings
Before system settings can be made, the display language must first be set and the date and time entered.
To do this, the following settings must be undertaken on the operating unit.
Selecting the language
LCD flashes
Press
and wait until the display has
been initialised.
1
Scroll using and to select the language
desired.
2
Press
to confirm your selection.
Setting the time
1
With the help of or , select the mode in
which the time is to be displayed, either in 24-
hour or in 12-hour format
(AM / PM).
2
Press
to confirm your selection.
3
Using and , set the year, month, day,
hours and minutes and press to confirm in
each case
.
4
Once the time has been displayed, the day of
the week and the time are shown in the display
window, even if the remote control is switched
off.
3
Temperature of the respective heating circuit
4
Day of the week and time
5
Temperature of the hot water tank
6
Outside temperature
7
Symbols for temperature sensors and temperatures
Flow temperature
→Heating characteristic
Flow temperature
→Direct
Only for swimming pool
heating
Room thermostat
→External
Room thermostat
→Internal
Keys and display of the operating unit
Display
1
Operating mode selection
AUTO
•
Depending in the outside temperature
values set, the heating or the cooling mode
*
1
is automatically activated.
Automatic heating
Automatic cooling
COOLING *
1,
*
2
•
The cooling mode can be
switched either on or off.
•
The cooling function is provided
by the outdoor unit.
AUTO
+ HOT WATER
•
Depending in the outside temperature
values set, the heating and hot water mode
or the cooling *
1
and hot water mode is
automatically activated.
Automatic heating
Automatic cooling
COOLING *
1,
*
2
+ HOT WATER
•
The cooling function is provided
by the outdoor unit.
•
The hot water function is provided
by the outdoor unit and/or the
electrical heating element.
HEATING
•
The heating mode can be switched
either on or off.
•
The heating function is provided by
the outdoor unit.
HOT WATER
•
The hot water mode is either switched
on or off.
•
The hot water function is provided by the
outdoor unit.
HEATING
+ HOT WATER
•
The heating function and the
preparation of hot water are
provided by the outdoor unit.
•
This operating mode can only be
selected if a hot water tank has
been installed.
* The direction arrows point to the current active
operating mode in each case.
•
Representation in heating mode
/hot water mode
•
Representation in defrost mode.
2
Operating symbols
The symbols shown below display the respective operating mode.
The symbol is not displayed (“Mode OFF” under the screen) if the mode is deactivated with the exception of the
weekly timer setting.
Holiday mode
Weekly timer mode
Quiet mode
Heating circuit: Room thermostat
→Integrated sensor
Power mode
Power control, SG ready or
SHP
Electric heating element
heating
Electric heating element hot
water
Solar mode
Bivalent heating source
(Bivalence heating source)
*1 The system is preset for operation without a cooling function. The cooling function can be activated by an authorised installer or service partner.
*2 This display only appears if the cooling function is activated, i.e. if the cooling mode is available.
2
4
3
1
5
6
7
Summary of Contents for Aquarea B1
Page 2: ...Notes ...
Page 116: ...Notes Notes ...
